Kurio Touch 4S Power Button Replacement Repair Guide

Difficulty

Moderate

Steps

12

Time Required

                          10 - 20 minutes            

Sections

1

• Power Button
• 12 steps

Flags

2

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

Better Introduction

Improve this guide by completing or revising its introduction.

• BackKurio Touch 4S

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Power Button               

• Make sure to open the back cover easily using the plastic opening tool.

Make sure to open the back cover easily using the plastic opening tool.

1024

Step 2

• Remove back cover by prying away from the device.
• The easiest place to remove the cover is from the bottom and top; try to open it from the right and left sides.
• Open it gently. Do not open it with too much pressure, so that the plastic back cover do not break.

Remove back cover by prying away from the device.

The easiest place to remove the cover is from the bottom and top; try to open it from the right and left sides.

Open it gently. Do not open it with too much pressure, so that the plastic back cover do not break.

Step 3

• To remove the battery, make sure the four 5mm Phillips screws on each side of your device is open using the Phillips #1 Screwdriver
• After you remove your four 5mm Phillips screws, use your plastic opening tool to help you open the plastic cover of your device.

To remove the battery, make sure the four 5mm Phillips screws on each side of your device is open using the Phillips #1 Screwdriver

After you remove your four 5mm Phillips screws, use your plastic opening tool to help you open the plastic cover of your device.

Step 4

• After you remove your four 5mm Philips screws use your plastic opening tool to help you open the plastic cover of your device.

After you remove your four 5mm Philips screws use your plastic opening tool to help you open the plastic cover of your device.

Step 5

• Separate the two halves of your Kurio Touch 4S and lay them besides each other.

Separate the two halves of your Kurio Touch 4S and lay them besides each other.

Step 6

• Gently remove the plastic cover that is covering the camera.

Gently remove the plastic cover that is covering the camera.

Step 7

• Use Phillips # 1 screw to open the four 5mm Philips screws on the motherboard.
• Open the screws gently and do not apply too much force as you could damage the motherboard.

Use Phillips # 1 screw to open the four 5mm Philips screws on the motherboard.

Open the screws gently and do not apply too much force as you could damage the motherboard.

Step 8

• Use the plastic opener to remove the battery.

Use the plastic opener to remove the battery.

Step 9

• Use tweezers to remove the black tape that is attached to the motherboard.

Use tweezers to remove the black tape that is attached to the motherboard.

Step 10

• Detach all the wire that are connected to the motherboard.
• Detach the camera module and other components that are attached to the motherboard.

Detach all the wire that are connected to the motherboard.

Detach the camera module and other components that are attached to the motherboard.

Step 11

• Remove the motherboard with the help of plastic opener.
• Detach the power plug before you remove the motherboard.

Remove the motherboard with the help of plastic opener.

Detach the power plug before you remove the motherboard.

Step 12

• Use tweezers to hold the power button and gently lift it up.
• Replace the old power button with the new one.

Use tweezers to hold the power button and gently lift it up.

Replace the old power button with the new one.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Moin Khan                     

Member since: 01/21/2015

234 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       USF Tampa, Team 6-5, Brown Winter 2015                        

                                                  Member of USF Tampa, Team 6-5, Brown Winter 2015 



                    USFT-BROWN-W15S6G5                     


                                            3 Members                     


                                            10 Guides authored