Difficulty

Moderate

Steps

8

Time Required

                          10 - 15 minutes

Sections

1

  • Front & Rear Facing Cameras
  • 8 steps

Flags

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

  • BackKurio Touch 4S

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Front & Rear Facing Cameras
  • Make sure to open the back cover easily using the plastic opening tool.

Make sure to open the back cover easily using the plastic opening tool.

1024

Step 2

  • Remove back cover by prying away from the Kurio.
  • The easiest place to remove the cover is from the bottom and top; try to open it from right to left sides.

Remove back cover by prying away from the Kurio.

The easiest place to remove the cover is from the bottom and top; try to open it from right to left sides.

Step 3

  • To remove the battery, make sure the four 5mm Philips screws on each side of your device is open using the philips#1 Screwdriver.

To remove the battery, make sure the four 5mm Philips screws on each side of your device is open using the philips#1 Screwdriver.

Step 4

  • After you remove your four 5mm Philips screws, use your plastic opening tool to help you open the plastic cover of your device.
  • All these screws are identical so don’t worry if you miss them up.

After you remove your four 5mm Philips screws, use your plastic opening tool to help you open the plastic cover of your device.

All these screws are identical so don’t worry if you miss them up.

Step 5

  • Remove the battery because it blocks the plastic shield that covers the camera.
  • Do not remove the wires that are attached to the battery and the motherboard.

Remove the battery because it blocks the plastic shield that covers the camera.

Do not remove the wires that are attached to the battery and the motherboard.

Step 6

  • Remove the plastic cover that is covering the camera area using tweezers.

Remove the plastic cover that is covering the camera area using tweezers.

Step 7

  • Separate the two halves of your Kurio Touch 4S.
  • Gently use a brush to remove any dirt or finger prints around the area.
  • Use the Tweezers to detach the front and back camera from its place.

Separate the two halves of your Kurio Touch 4S.

Gently use a brush to remove any dirt or finger prints around the area.

Use the Tweezers to detach the front and back camera from its place.

Step 8

  • Remove the copper wires by using the Tweezers to replace your new camera.

Remove the copper wires by using the Tweezers to replace your new camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Khalid AlTamimi

Member since: 01/21/2015

275 Reputation

                                      2 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       USF Tampa, Team 6-5, Brown Winter 2015                        

                                                  Member of USF Tampa, Team 6-5, Brown Winter 2015 



                    USFT-BROWN-W15S6G5                     


                                            3 Members                     


                                            10 Guides authored