Kurio Touch 4S Battery Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          3 - 5 minutes

Sections

Battery
6 steps

Flags

BackKurio Touch 4S
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Make sure to open the back cover easily using the plastic opening tool.

Make sure to open the back cover easily using the plastic opening tool.

1024

Step 2

Remove back cover by prying away from the device.
The easiest place to remove the cover is from the bottom and top, then try to open it from the right and left sides.
Open it gently. Do not open it with too much pressure, so that the plastic back cover do not break.

Remove back cover by prying away from the device.

The easiest place to remove the cover is from the bottom and top, then try to open it from the right and left sides.

Open it gently. Do not open it with too much pressure, so that the plastic back cover do not break.

Step 3

To remove the battery, make sure the four 5mm Philips screws on each side of your device is open using the Phillips #1 Screwdriver.

To remove the battery, make sure the four 5mm Philips screws on each side of your device is open using the Phillips #1 Screwdriver.

Step 4

After you remove your four screws use your plastic opening tool to help you open the plastic cover of your device.

After you remove your four screws use your plastic opening tool to help you open the plastic cover of your device.

Step 5

Use the plastic opening tool to remove the battery from its place.
The battery is glued into the device. So try removing it gently.

Use the plastic opening tool to remove the battery from its place.

The battery is glued into the device. So try removing it gently.

Step 6

Remove the two wires using soldering tool to detach your bad battery from the device .
Gently remove the wires one by one. Do not damage the head that is glued into the motherboard.
For more information on how to solder and desolder the wire Click here

Remove the two wires using soldering tool to detach your bad battery from the device .

Gently remove the wires one by one. Do not damage the head that is glued into the motherboard.

For more information on how to solder and desolder the wire Click here

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 3 other contributors

                    Khalid AlTamimi

Member since: 01/21/2015

275 Reputation

                                      2 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       USF Tampa, Team 6-5, Brown Winter 2015                        

                                                  Member of USF Tampa, Team 6-5, Brown Winter 2015 



                    USFT-BROWN-W15S6G5                     


                                            3 Members                     


                                            10 Guides authored

Phil Bowring - Jan 20, 2017

do you know where to buy a replacement battery ?

Brooke Lonsdale - Nov 3, 2020

Any idea where I can purchase a replacement battery?

Introduction#

What you need#

Team#

Introduction

What you need

Team