Kurio 7 Back Panel Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          7 minutes

Sections

Back Panel
4 steps

Flags

BackKurio 7
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Panel

Begin by removing the rubber cover from the Kurio 7.

Begin by removing the rubber cover from the Kurio 7.

1024

Step 2

Remove the four 30 mm Phillips #00 screws from the outer case.

Remove the four 30 mm Phillips #00 screws from the outer case.

Step 3

Insert the plastic opening tool in the gap between the front cover and the back cover of the device.
Slide the plastic opening tool around the edge of the device. Gently pry apart the tabs that hold the front cover and the back cover together.
Be careful not to break off the tabs that hold the front cover and the back cover together.

Insert the plastic opening tool in the gap between the front cover and the back cover of the device.

Slide the plastic opening tool around the edge of the device. Gently pry apart the tabs that hold the front cover and the back cover together.

Be careful not to break off the tabs that hold the front cover and the back cover together.

Step 4

Once all of the tabs are removed, the back cover should come off easily.
Gently remove the back cover. There are wires inside that may get caught on the cover while removing it. These wires are soldered to their components and are difficult to reattach.

Once all of the tabs are removed, the back cover should come off easily.

Gently remove the back cover. There are wires inside that may get caught on the cover while removing it. These wires are soldered to their components and are difficult to reattach.

Replace with a new back panel. To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 10 other contributors

                    Eric Rice

Member since: 04/14/2014

913 Reputation

                                      3 Guides authored                  



                       Badges:
                       20







                                                        +17 more badges

Team

                       Cal Poly, Team 12-36, Maness Spring 2014                        

                                                  Member of Cal Poly, Team 12-36, Maness Spring 2014 



                    CPSU-MANESS-S14S12G36                     


                                            4 Members                     


                                            14 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team