Difficulty

Moderate

Steps

7

Time Required

                          30 minutes

Sections

2

  • Back Cover
  • 4 steps
  • Speakers
  • 3 steps

Flags

3

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

  • BackKurio 10S

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Turn the device over and place it with the screen down on a flat surface that is clean so the screen does not get scratched.

Turn the device over and place it with the screen down on a flat surface that is clean so the screen does not get scratched.

1024

Step 2

  • Locate the four screws, two on each side.
  • Using the philips head screwdriver, carefully remove each screw and keep them together in a safe location.

Locate the four screws, two on each side.

Using the philips head screwdriver, carefully remove each screw and keep them together in a safe location.

Step 3

  • Once all screws are removed, use a spudger to get under a corner and unclip the hooks.
  • Once the spudger is under the cover, slide it all the way around the device, pushing lightly into the device making sure it stays under the cover until all the clips are removed.
  • The back cover is difficult to remove, so do not be afraid of using some force once all of the clips have been removed.

Once all screws are removed, use a spudger to get under a corner and unclip the hooks.

Once the spudger is under the cover, slide it all the way around the device, pushing lightly into the device making sure it stays under the cover until all the clips are removed.

The back cover is difficult to remove, so do not be afraid of using some force once all of the clips have been removed.

Step 4

  • The back cover should then be able to easily be removed from the device and you should see the battery and other internal components.

The back cover should then be able to easily be removed from the device and you should see the battery and other internal components.

Step 5

              Speakers
  • Locate the two speakers on either side of the device

Locate the two speakers on either side of the device

Step 6

  • Carefully disconnect the black and red wire from the motherboard using tweezers
  • Caution: motherboard parts are very fragile, so be careful when removing the wires

Carefully disconnect the black and red wire from the motherboard using tweezers

Caution: motherboard parts are very fragile, so be careful when removing the wires

Step 7

  • Remove the speaker from its holder.

Remove the speaker from its holder.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Hanna Desilets

Member since: 03/25/2015

122 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       UMass Dartmouth, Team 1-6, Shastany Spring 2015                        

                                                  Member of UMass Dartmouth, Team 1-6, Shastany Spring 2015 



                    UMASSD-SHASTANY-S15S1G6                     


                                            4 Members                     


                                            8 Guides authored

Ralph Watson - Aug 28, 2017

Reply

This tutorial was veryhelpful