Difficulty

Easy

Steps

4

Time Required

                          15 minutes

Sections

1

  • Back Cover
  • 4 steps

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

  • BackKurio 10S

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Turn the device over and place it with the screen down on a flat surface that is clean so the screen does not get scratched.

Turn the device over and place it with the screen down on a flat surface that is clean so the screen does not get scratched.

1024

Step 2

  • Locate the four screws, two on each side.
  • Using the philips head screwdriver, carefully remove each screw and keep them together in a safe location.

Locate the four screws, two on each side.

Using the philips head screwdriver, carefully remove each screw and keep them together in a safe location.

Step 3

  • Once all screws are removed, use a spudger to get under a corner and unclip the hooks.
  • Once the spudger is under the cover, slide it all the way around the device, pushing lightly into the device making sure it stays under the cover until all the clips are removed.
  • The back cover is difficult to remove, so do not be afraid of using some force once all of the clips have been removed.

Once all screws are removed, use a spudger to get under a corner and unclip the hooks.

Once the spudger is under the cover, slide it all the way around the device, pushing lightly into the device making sure it stays under the cover until all the clips are removed.

The back cover is difficult to remove, so do not be afraid of using some force once all of the clips have been removed.

Step 4

  • The back cover should then be able to easily be removed from the device and you should see the battery and other internal components.

The back cover should then be able to easily be removed from the device and you should see the battery and other internal components.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 1 other contributor 


                    Timothy Kramer

Member since: 03/27/2015

325 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       UMass Dartmouth, Team 1-6, Shastany Spring 2015                        

                                                  Member of UMass Dartmouth, Team 1-6, Shastany Spring 2015 



                    UMASSD-SHASTANY-S15S1G6                     


                                            4 Members                     


                                            8 Guides authored