Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

2

  • Bottom Panel
  • 3 steps
  • Power Switch
  • 2 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackKrups 963

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Removing Bottom Screws
  • Make sure the device is unplugged before continuing.
  • Use a Phillips size 2 screwdriver to remove the four 12mm screws found on the bottom of the machine.

Make sure the device is unplugged before continuing.

Use a Phillips size 2 screwdriver to remove the four 12mm screws found on the bottom of the machine.

1024

Step 2

  • Remove the single black Phillips size 0 10mm length screw on the back of the machine.

Remove the single black Phillips size 0 10mm length screw on the back of the machine.

Step 3

  • Remove the bottom cover from the machine and slide it down the power cord.

Remove the bottom cover from the machine and slide it down the power cord.

Step 4

              Power Switch
  • Use your hands or a pair of needle nose pliers to remove the wire attached to the switch.

Use your hands or a pair of needle nose pliers to remove the wire attached to the switch.

Step 5

  • Grip either in the inside or outside of the switch with the needle nose pliers or your hand, and pull to remove the switch.

Grip either in the inside or outside of the switch with the needle nose pliers or your hand, and pull to remove the switch.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Wyatt Hall

Member since: 10/13/2014

842 Reputation

                                      7 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team 6-25, Maness Fall 2014                        

                                                  Member of Cal Poly, Team 6-25, Maness Fall 2014 



                    CPSU-MANESS-F14S6G25                     


                                            4 Members                     


                                            7 Guides authored

susangellert - Jun 17, 2016

Reply

Wyatt, thank you for the instructions. I need to replace the power switch on my Krups 963 coffee maker, but I can’t find the part anywhere. Do you know where to order one from? Thanks, –Susan