Difficulty

Easy

Steps

5

Time Required

                          5 - 10 minutes

Sections

2

  • Bottom Panel
  • 3 steps
  • Power Cord
  • 2 steps

Flags

0

  • BackKrups 963

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Removing Bottom Screws
  • Make sure the device is unplugged before continuing.
  • Use a Phillips size 2 screwdriver to remove the four 12mm screws found on the bottom of the machine.

Make sure the device is unplugged before continuing.

Use a Phillips size 2 screwdriver to remove the four 12mm screws found on the bottom of the machine.

1024

Step 2

  • Remove the single black Phillips size 0 10mm length screw on the back of the machine.

Remove the single black Phillips size 0 10mm length screw on the back of the machine.

Step 3

  • Remove the bottom cover from the machine and slide it down the power cord.

Remove the bottom cover from the machine and slide it down the power cord.

Step 4

              Power Cord
  • Use the PH2 (or similar) screw driver to remove the two 12mm screws holding the clear restraining brace.
  • Remove the restraining brace from the machine base.

Use the PH2 (or similar) screw driver to remove the two 12mm screws holding the clear restraining brace.

Remove the restraining brace from the machine base.

Step 5

  • Use a 2.0 flat head (or similar) screw driver to loosen the screw holding the power cord in.

Use a 2.0 flat head (or similar) screw driver to loosen the screw holding the power cord in.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Wyatt Hall

Member since: 10/13/2014

842 Reputation

                                      7 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team 6-25, Maness Fall 2014                        

                                                  Member of Cal Poly, Team 6-25, Maness Fall 2014 



                    CPSU-MANESS-F14S6G25                     


                                            4 Members                     


                                            7 Guides authored