Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

1

  • Kreidler Supermoto 125 DD Oil Change
  • 7 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackMotorcycle - Kreidler Supermoto 125 DD

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Step 1

              Kreidler Supermoto 125 DD Oil Change
  • First you need to remove the bottom screw located bellow the engine. And clean and save the two pieces that goes with it (spring and tip).

First you need to remove the bottom screw located bellow the engine. And clean and save the two pieces that goes with it (spring and tip).

1024

Step 2

  • Then let all the oil drain from the reservoir.

Then let all the oil drain from the reservoir.

Step 3

  • Remove the cover of the oil filter and the filter itself.
  • Drain all the remaining oil.

Remove the cover of the oil filter and the filter itself.

Drain all the remaining oil.

Step 4

  • Clean the filter holding, place the new filter and screw tge cover in place.

Clean the filter holding, place the new filter and screw tge cover in place.

Step 5

  • Introduce the two pices and the bottom screw in their place with a new sealing ring in the right order (tip -> spring -> screw with sealing ring).

Introduce the two pices and the bottom screw in their place with a new sealing ring in the right order (tip -> spring -> screw with sealing ring).

Step 6

  • Remove the top lid of the cartrige and put the bike in a vertical position.
  • Pour the new oil into the cartrige and monitor his level in the visor until it reaches the desired level.

Remove the top lid of the cartrige and put the bike in a vertical position.

Pour the new oil into the cartrige and monitor his level in the visor until it reaches the desired level.

Step 7

  • Close the lid and start the engine to see if there are no leaks and ti see if it is working smoothely.

Close the lid and start the engine to see if there are no leaks and ti see if it is working smoothely.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Ismael Domingos

Member since: 01/24/2016

145 Reputation

                                      1 Guide authored                  



                       Badges:
                       2