Kolcraft Cloud Plus Seat Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          15 minutes

Sections

Seat
11 steps

Flags

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

BackKolcraft Cloud Plus
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Seat

Unsnap the six buttons holding the storage basket under the seat.

Unsnap the six buttons holding the storage basket under the seat.

1024

Step 2

Unsnap the “Child Tray” by pulling outwards on the plastic connectors on either side of the stroller. As you pull, lift upwards to completely remove the tray from its connection to the stroller’s frame.

Unsnap the “Child Tray” by pulling outwards on the plastic connectors on either side of the stroller. As you pull, lift upwards to completely remove the tray from its connection to the stroller’s frame.

Step 3

Remove the “Parent Tray” by pulling outwards on the plastic connectors on either side of the stroller. Lift straight up to remove completely.

Remove the “Parent Tray” by pulling outwards on the plastic connectors on either side of the stroller. Lift straight up to remove completely.

Step 4

Unscrew the three, 14mm Phillips #2 screws on the outer frame of the stroller and repeat for the opposite side.
Remove the plastic washers that come off with the screws.
You may have to fold the stroller, then flip it over to access the screws on its underside.

Unscrew the three, 14mm Phillips #2 screws on the outer frame of the stroller and repeat for the opposite side.

Remove the plastic washers that come off with the screws.

You may have to fold the stroller, then flip it over to access the screws on its underside.

Step 5

Unscrew the two, 14mm Phillips #2 screws on either side of the outside frame near the foot rest.
Remove the plastic washers.

Unscrew the two, 14mm Phillips #2 screws on either side of the outside frame near the foot rest.

Remove the plastic washers.

Step 6

Unscrew the two, 14mm Phillips #2 on the underside of the seat and repeat for the opposite side of the stroller.
Remove the plastic washers.

Unscrew the two, 14mm Phillips #2 on the underside of the seat and repeat for the opposite side of the stroller.

Step 7

Unscrew 14mm Phillips #2 screw on the underside of the stroller and repeat this process for the opposite side.
Remove the plastic washers.
These plastic washers are circular to better fit around the frame. Remember that these locations require the circular washers.

Unscrew 14mm Phillips #2 screw on the underside of the stroller and repeat this process for the opposite side.

These plastic washers are circular to better fit around the frame. Remember that these locations require the circular washers.

Step 8

Pull the cover down the metal frame to reveal a 14mm Phillips #2 screw on either side of the inside frame.

Pull the cover down the metal frame to reveal a 14mm Phillips #2 screw on either side of the inside frame.

Step 9

Unscrew the 14mm Phillips #2 screws located under the cover on either side of the inside frame.
Remove the plastic washers.

Unscrew the 14mm Phillips #2 screws located under the cover on either side of the inside frame.

Step 10

Using the spudger, pop out the small, white ball that’s on the underside of the plastic part of the frame. Repeat this process for the opposite side.
Brace the spudger against the frame—it will provide the extra force needed to pop the white balls through their holes.

Using the spudger, pop out the small, white ball that’s on the underside of the plastic part of the frame. Repeat this process for the opposite side.

Brace the spudger against the frame—it will provide the extra force needed to pop the white balls through their holes.

Step 11

Place the metal spudger between the plastic connector and the metal frame of the sun shade.
Use the spudger to pry outwards on the plastic while simultaneously pulling straight up on the metal frame of the sun shade.
Repeat this process for the opposite side to completely remove the seat.
Use one hand to brace the frame of the stroller by firmly pushing down on the plastic part of the frame.

Place the metal spudger between the plastic connector and the metal frame of the sun shade.

Use the spudger to pry outwards on the plastic while simultaneously pulling straight up on the metal frame of the sun shade.

Repeat this process for the opposite side to completely remove the seat.

Use one hand to brace the frame of the stroller by firmly pushing down on the plastic part of the frame.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    Christopher Peterson

Member since: 10/01/2015

330 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Cal Poly, Team 11-1, Forte Fall 2015                        

                                                  Member of Cal Poly, Team 11-1, Forte Fall 2015 



                    CPSU-FORTE-F15S11G1                     


                                            4 Members                     


                                            3 Guides authored

Markup Mishap#

Introduction#

What you need#

Team#

Markup Mishap

Introduction

What you need

Team