Kodak Signet 35 Shutter Spring Replacement Repair Guide

Difficulty

Difficult

Steps

4

Time Required

                          7 minutes            

Sections

1

• Shutter Spring
• 4 steps

Flags

0

• BackKodak Signet 35

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Shutter Spring               

• While the camera is lying on its back, unscrew the front lens assembly and remove the lens and the faceplate. Then lift off the speed setting.

While the camera is lying on its back, unscrew the front lens assembly and remove the lens and the faceplate. Then lift off the speed setting.

1024

Step 2

• Remove the lever from the stopper by pushing it back and then upwards.

Remove the lever from the stopper by pushing it back and then upwards.

Step 3

• Remove the stopper by lifting it upwards with the tweezers.

Remove the stopper by lifting it upwards with the tweezers.

Step 4

• Using tweezers, unhitch the spring from the base and remove it by lifting upwards.

Using tweezers, unhitch the spring from the base and remove it by lifting upwards.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Mellyssa Greene                     

Member since: 09/07/2016

134 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       USF Tampa, Team 6-3, Remmell Fall 2016                        

                                                  Member of USF Tampa, Team 6-3, Remmell Fall 2016 



                    USFT-REMMELL-F16S6G3                     


                                            4 Members                     


                                            5 Guides authored                     

Ben Le - Jun 8, 2018

Reply

What kind of spring can be used to replace it or how would one revitalize the old spring?

Shawn Reynolds - Jun 22, 2022

Reply

What does “front lens assembly” look like? what parts do I have to unscrew?