Difficulty

Difficult

Steps

7

Time Required

                          30 minutes

Sections

2

  • Front Cover
  • 3 steps
  • Lens
  • 4 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackKodak S100 EF

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Front Cover
  • Have the camera facing upwards and the flash closest to you.
  • Unscrew the two 6.2 mm Phillips screws on the top half of the camera.

Have the camera facing upwards and the flash closest to you.

Unscrew the two 6.2 mm Phillips screws on the top half of the camera.

1024

Step 2

  • Flip the camera over to the other side-with flash farthest from you.
  • Unscrew top two 6.2mm Phillips screws on this side.

Flip the camera over to the other side-with flash farthest from you.

Unscrew top two 6.2mm Phillips screws on this side.

Step 3

  • Turn the camera so the bottom is facing up with the front-facing away.
  • Unscrew the 6.2mm Phillips screw on the top right.
  • The front cover is now unscrewed and should be lifted evenly and removed.

Turn the camera so the bottom is facing up with the front-facing away.

Unscrew the 6.2mm Phillips screw on the top right.

The front cover is now unscrewed and should be lifted evenly and removed.

Step 4

              Lens
  • Remove the two 6.2mm Phillips screws on either side of the lens securing the metal plate.

Remove the two 6.2mm Phillips screws on either side of the lens securing the metal plate.

Step 5

  • Pull aside the plastic piece resting atop the metal lens plate in order to access the other screws.

Pull aside the plastic piece resting atop the metal lens plate in order to access the other screws.

Step 6

  • To remove other screws, metal panel must be lifted up slightly to access.
  • Lift metal panel and insert screwdriver through holes in panel to reach screws underneath. Remove the two 6.2mm Phillips screws.

To remove other screws, metal panel must be lifted up slightly to access.

Lift metal panel and insert screwdriver through holes in panel to reach screws underneath. Remove the two 6.2mm Phillips screws.

Step 7

  • Look at the black plate on the right side of the lens that the metal plate is resting on.
  • Unscrew two 6.2mm Phillips screws on the black plate next to the lens.
  • At this point, all screws are removed and lens can should be carefully lifted and removed, including both plates and the plastic ring around the lens.

Look at the black plate on the right side of the lens that the metal plate is resting on.

Unscrew two 6.2mm Phillips screws on the black plate next to the lens.

At this point, all screws are removed and lens can should be carefully lifted and removed, including both plates and the plastic ring around the lens.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Michelle

Member since: 04/04/2011

107 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team 25-28, Garner Spring 2011                        

                                                  Member of Cal Poly, Team 25-28, Garner Spring 2011 



                    CPSU-GARNER-S11S25G28                     


                                            4 Members                     


                                            6 Guides authored