Featured
Featured Guide
Difficulty
Easy
Steps
3
Time Required
10 minutes
Sections
1
- Front Cover
- 3 steps
Flags
2
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Featured Guide
This guide has been found to be exceptionally cool by the iFixit staff.
BackKodak S100 EF
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front Cover
- Have the camera facing upwards and the flash closest to you.
- Unscrew the two 6.2 mm Phillips screws on the top half of the camera.
Have the camera facing upwards and the flash closest to you.
Unscrew the two 6.2 mm Phillips screws on the top half of the camera.
1024
Step 2
- Flip the camera over to the other side-with flash farthest from you.
- Unscrew top two 6.2mm Phillips screws on this side.
Flip the camera over to the other side-with flash farthest from you.
Unscrew top two 6.2mm Phillips screws on this side.
Step 3
- Turn the camera so the bottom is facing up with the front-facing away.
- Unscrew the 6.2mm Phillips screw on the top right.
- The front cover is now unscrewed and should be lifted evenly and removed.
Turn the camera so the bottom is facing up with the front-facing away.
Unscrew the 6.2mm Phillips screw on the top right.
The front cover is now unscrewed and should be lifted evenly and removed.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 7 other contributors
Michelle
Member since: 04/04/2011
107 Reputation
5 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team 25-28, Garner Spring 2011
Member of Cal Poly, Team 25-28, Garner Spring 2011
CPSU-GARNER-S11S25G28
4 Members
6 Guides authored
