Kodak S100 Ef Film Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 minutes

Sections

Film
5 steps

Flags

BackKodak S100 EF
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

This guide will walk through the process of removing 35mm film as well as replacing it with a new roll for the Kodak S100 EF camera. The steps will cover rolling the old film cartridge and installing the new film cartridge. Before attempting this guide, a new roll of 35mm film is required.

For more details about the camera and where to purchase the 35mm film, you are recommended to review this information page.

One important note to remember is to make sure to power off the camera completely prior to beginning the replacement steps.

What you need

Step 1

              Film

Lift up the lever from the center of the film roller.
Turn it clockwise to roll up the film until you feel the roller release, indicating all the film has been rolled up.

Lift up the lever from the center of the film roller.

Turn it clockwise to roll up the film until you feel the roller release, indicating all the film has been rolled up.

1024

Step 2

On the far left side on the back of the camera there is a switch that says “open.”
Slide the button up to the top where it says “open.”
This should pop open the door, revealing the rolled up film inside.

On the far left side on the back of the camera there is a switch that says “open.”

Slide the button up to the top where it says “open.”

This should pop open the door, revealing the rolled up film inside.

Step 3

To take out the old film and insert the new, you must lift up on the film roller.
Pull up on the lever to pop the roller up which will release the film.
Remove the old roll of film and slide in the new roll.
Push the roller back down to secure the film.

To take out the old film and insert the new, you must lift up on the film roller.

Pull up on the lever to pop the roller up which will release the film.

Remove the old roll of film and slide in the new roll.

Push the roller back down to secure the film.

Step 4

To prepare the film for use, slightly pull the tail of the film out of the roll.
Drag the tail end of the film past the rotating column on the right side.
Attach the hooks at the base of the column to the holes located at the bottom of the film.

To prepare the film for use, slightly pull the tail of the film out of the roll.

Drag the tail end of the film past the rotating column on the right side.

Attach the hooks at the base of the column to the holes located at the bottom of the film.

Step 5

After the film is secured, close the camera door.
Make sure the lever is put back in place on the film roller.
Use the scroll wheel to advance the film until it is ready to take pictures.

After the film is secured, close the camera door.

Make sure the lever is put back in place on the film roller.

Use the scroll wheel to advance the film until it is ready to take pictures.

Once the film is in place-to reassemble the camera-close the camera door and make sure the scroll wheel is pushed back down.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 7 other contributors

                    Michelle

Member since: 04/04/2011

107 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team 25-28, Garner Spring 2011                        

                                                  Member of Cal Poly, Team 25-28, Garner Spring 2011 



                    CPSU-GARNER-S11S25G28                     


                                            4 Members                     


                                            6 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team