Kodak Easyshare Z981 Back Cover Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          15 minutes            

Sections

1

• Back Cover
• 4 steps

Flags

2

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Better Introduction

Improve this guide by completing or revising its introduction.

• BackKodak Easyshare Z981

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Back Cover               

• Remove screws using a 00 Phillips-Head screwdriver:
• Eight (8) 3mm screws on the lower portion of the camera
• Four (4) on the bottom of the camera
• Four (4) inside the battery cover

Remove screws using a 00 Phillips-Head screwdriver:

Eight (8) 3mm screws on the lower portion of the camera

Four (4) on the bottom of the camera

Four (4) inside the battery cover

1024

Step 2

• Start from a corner and gently remove the bottom cover of the camera.
• The cover will easily lift off without much pressure necessary.

Start from a corner and gently remove the bottom cover of the camera.

The cover will easily lift off without much pressure necessary.

Step 3

• Use a Phillips #00 Screwdriver to remove the 4 mm screws from each side of the back cover of the camera.
• Two (2) screws are located in the left side of the device
• Two (2) screws are locatecd in the right side of the device

Use a Phillips #00 Screwdriver to remove the 4 mm screws from each side of the back cover of the camera.

Two (2) screws are located in the left side of the device

Two (2) screws are locatecd in the right side of the device

Step 4

• Use a Plastic Opening Tool to remove the back of the camera and pull gently on the cover to remove the cover
• Start from one corner and apply light pressure with the tool.

Use a Plastic Opening Tool to remove the back of the camera and pull gently on the cover to remove the cover

Start from one corner and apply light pressure with the tool.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Olivia Boyna                     

Member since: 03/03/2015

502 Reputation

                                      3 Guides authored                  



                       Badges:
                       16







                                                        +13 more badges                           

Team

                       Sam Houston State, Team 13-6, Blackburne Winter 2015                        

                                                  Member of Sam Houston State, Team 13-6, Blackburne Winter 2015 



                    SHSU-BLACKBURNE-W15S13G6                     


                                            3 Members                     


                                            9 Guides authored