Difficulty
Moderate
Steps
8
Time Required
Suggest a time??
Sections
2
- Battery
- 5 steps
- Buttons
- 3 steps
Flags
0
BackKodak Easyshare V1003
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Turn off camera by firmly pressing the power button that is located on the top of the camera.
Turn off camera by firmly pressing the power button that is located on the top of the camera.
1024
Step 2
- Position camera with the bottom facing up.
Position camera with the bottom facing up.
Step 3
- With your finger, slide the battery cover in the direction of the open arrow.
With your finger, slide the battery cover in the direction of the open arrow.
Step 4
- Lift the battery cover up gently.
Lift the battery cover up gently.
Step 5
- Gently push the battery down until a click is heard. Battery should release and be lifted out of slot.
Gently push the battery down until a click is heard. Battery should release and be lifted out of slot.
Step 6
Buttons
- Use a J00 screwdriver to remove the five exterior screws.
Use a J00 screwdriver to remove the five exterior screws.
Step 7
- Use a plastic opening tool to pry off the back casing.
Use a plastic opening tool to pry off the back casing.
Step 8
- Completely remove the back casing from the device.
- Using a plastic tool to remove the bottom.
Completely remove the back casing from the device.
Using a plastic tool to remove the bottom.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Vanessa Soares
Member since: 03/15/2017
222 Reputation
2 Guides authored
Badges:
7
+4 more badges
Team
UMass Dartmouth, Team S9-G4, Martin Spring 2017
Member of UMass Dartmouth, Team S9-G4, Martin Spring 2017
UMASSD-MARTIN-S17S9G4
4 Members
10 Guides authored