Difficulty
Very easy
Steps
5
Time Required
2 minutes
Sections
1
- Kodak Easyshare Printer Dock (Series 3) Paper Jam Solution
- 5 steps
Flags
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
BackKodak EasyShare Printer Dock (Series 3)
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Identify the problem
- Identify that your printer is jammed. This is usually indicated by the paper light blinking quickly.
Identify that your printer is jammed. This is usually indicated by the paper light blinking quickly.
1024
Step 2
Removing the paper tray
- Gently pull the paper tray out of the printing dock to remove it.
- When the paper tray is empty, the paper light should glow a steady amber.
Gently pull the paper tray out of the printing dock to remove it.
When the paper tray is empty, the paper light should glow a steady amber.
Step 3
Disconnecting the power adapter
- Disconnect the power adapter from the printer for 10 seconds, and then reconnect the cord.
- On some models, you may have to press the power button in addition to plugging in the power adapter.
- Wait for the printer to initialize in order for the jammed paper to exit from the back side.
- Notice: Carefully remove the paper if it does not automatically eject.
Disconnect the power adapter from the printer for 10 seconds, and then reconnect the cord.
On some models, you may have to press the power button in addition to plugging in the power adapter.
Wait for the printer to initialize in order for the jammed paper to exit from the back side.
Notice: Carefully remove the paper if it does not automatically eject.
Step 4
Removing the paper supply
- With the paper tray in hand, open the front lid in order to gain access to the paper supply.
- Take hold of the paper bundle, and carefully “fan” it to keep the sheets from sticking together.
With the paper tray in hand, open the front lid in order to gain access to the paper supply.
Take hold of the paper bundle, and carefully “fan” it to keep the sheets from sticking together.
Step 5
Reload and reinstall the paper tray
- Reload the paper tray by sliding the paper bundle back into the intended slot, and then close the lid.
- Next, slide the paper tray in the printer tray slot until the tray locks into place.
- To ensure the paper tray fits squarely on the printer dock, make sure to keep the paper tray cover all the way open while installing.
- Press the power or print button to clear the paper error and resume printing.
Reload the paper tray by sliding the paper bundle back into the intended slot, and then close the lid.
Next, slide the paper tray in the printer tray slot until the tray locks into place.
To ensure the paper tray fits squarely on the printer dock, make sure to keep the paper tray cover all the way open while installing.
Press the power or print button to clear the paper error and resume printing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 5 other contributors
Henry Ta
Member since: 10/13/2016
101 Reputation
1 Guide authored
Badges:
2
Team
University of Maine, Team 1-6, Diaz Fall 2016
Member of University of Maine, Team 1-6, Diaz Fall 2016
UMAINE-DIAZ-F16S1G6
2 Members
1 Guide authored
Amy Winfree - Dec 24, 2022
Reply
My doc is only print half of pic what can ido