Difficulty

Easy

Steps

13

Time Required

                          5 - 15 minutes

Sections

3

  • Battery
  • 2 steps
  • Kodak EasyShare LS743 Camera Case Disassembly
  • 3 steps
  • Top and menu buttons
  • 8 steps

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackKodak EasyShare LS743

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Using your fingernail, open the battery cover.

Using your fingernail, open the battery cover.

1024

Step 2

  • Slide the orange latch sideways to eject the battery.
  • Remove the battery from the battery slot.

Slide the orange latch sideways to eject the battery.

Remove the battery from the battery slot.

Step 3

              Kodak EasyShare LS743 Camera Case Disassembly
  • Using a Phillips #00 screwdriver, remove two 5.39 mm screws next to the battery slot.
  • Remove the metal piece holding down the lanyard, then remove the lanyard.

Using a Phillips #00 screwdriver, remove two 5.39 mm screws next to the battery slot.

Remove the metal piece holding down the lanyard, then remove the lanyard.

Step 4

  • Using a Phillips #00 screwdriver, remove seven screws located on the outside case of the camera.
  • One 6.25 mm screw is located on the top right corner, right to the “OK” button.
  • Four 4.45 mm screws are on the bottom of the camera.
  • Two 2.95 mm screws are on the left side of the camera, above the USB port.

Using a Phillips #00 screwdriver, remove seven screws located on the outside case of the camera.

One 6.25 mm screw is located on the top right corner, right to the “OK” button.

Four 4.45 mm screws are on the bottom of the camera.

Two 2.95 mm screws are on the left side of the camera, above the USB port.

Step 5

  • Carefully remove the rear camera casing.
  • Carefully remove the front camera casing.

Carefully remove the rear camera casing.

Carefully remove the front camera casing.

Step 6

              Top and menu buttons
  • Remove the top panel screw (1x 4.37mm).

Remove the top panel screw (1x 4.37mm).

Step 7

  • Remove the top panel.

Remove the top panel.

Step 8

  • Remove the back panel screws (1x 3.33mm, and 1x 3.40mm).

Remove the back panel screws (1x 3.33mm, and 1x 3.40mm).

Step 9

  • Separate the inner casing from the tripod mount.

Separate the inner casing from the tripod mount.

Step 10

  • Gently pull the orange tab out of the circuit board.

Gently pull the orange tab out of the circuit board.

Step 11

  • Carefully separate and flip over the LCD panel to expose the central circuit board.

Carefully separate and flip over the LCD panel to expose the central circuit board.

Step 12

  • Remove the (1x 3.33mm) screw from the menu button panel .

Remove the (1x 3.33mm) screw from the menu button panel .

Step 13

  • Pull the second orange tab from the circuit board and remove the buttons.

Pull the second orange tab from the circuit board and remove the buttons.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 8 other contributors 


                    Michael

Member since: 06/24/2010

63 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Cal Poly, Team 2-8, Johann Summer 2010                        

                                                  Member of Cal Poly, Team 2-8, Johann Summer 2010 



                    CPSU-JOHANN-R10S2G8                     


                                            5 Members                     


                                            16 Guides authored