Difficulty
Easy
Steps
3
Time Required
9 - 20 minutes
Sections
1
- Kodak EasyShare LS743 Camera Case Disassembly
- 3 steps
Flags
0
BackKodak EasyShare LS743
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Kodak EasyShare LS743 Camera Case Disassembly
- Using a Phillips #00 screwdriver, remove two 5.39 mm screws next to the battery slot.
- Remove the metal piece holding down the lanyard, then remove the lanyard.
Using a Phillips #00 screwdriver, remove two 5.39 mm screws next to the battery slot.
Remove the metal piece holding down the lanyard, then remove the lanyard.
1024
Step 2
- Using a Phillips #00 screwdriver, remove seven screws located on the outside case of the camera.
- One 6.25 mm screw is located on the top right corner, right to the “OK” button.
- Four 4.45 mm screws are on the bottom of the camera.
- Two 2.95 mm screws are on the left side of the camera, above the USB port.
Using a Phillips #00 screwdriver, remove seven screws located on the outside case of the camera.
One 6.25 mm screw is located on the top right corner, right to the “OK” button.
Four 4.45 mm screws are on the bottom of the camera.
Two 2.95 mm screws are on the left side of the camera, above the USB port.
Step 3
- Carefully remove the rear camera casing.
- Carefully remove the front camera casing.
Carefully remove the rear camera casing.
Carefully remove the front camera casing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 9 other contributors
Michael
Member since: 06/24/2010
63 Reputation
2 Guides authored
Badges:
6
+3 more badges
Team
Cal Poly, Team 2-8, Johann Summer 2010
Member of Cal Poly, Team 2-8, Johann Summer 2010
CPSU-JOHANN-R10S2G8
5 Members
16 Guides authored