Difficulty

Easy

Steps

6

Time Required

                          5 minutes            

Sections

3

  • Battery
  • 2 steps
  • Kodak EasyShare LS743 Camera Case Disassembly
  • 3 steps
  • Battery Door
  • 1 step

Flags

0

  • BackKodak EasyShare LS743

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Using your fingernail, open the battery cover.

Using your fingernail, open the battery cover.

1024

Step 2

  • Slide the orange latch sideways to eject the battery.
  • Remove the battery from the battery slot.

Slide the orange latch sideways to eject the battery.

Remove the battery from the battery slot.

Step 3

              Kodak EasyShare LS743 Camera Case Disassembly               
  • Using a Phillips #00 screwdriver, remove two 5.39 mm screws next to the battery slot.
  • Remove the metal piece holding down the lanyard, then remove the lanyard.

Using a Phillips #00 screwdriver, remove two 5.39 mm screws next to the battery slot.

Remove the metal piece holding down the lanyard, then remove the lanyard.

Step 4

  • Using a Phillips #00 screwdriver, remove seven screws located on the outside case of the camera.
  • One 6.25 mm screw is located on the top right corner, right to the “OK” button.
  • Four 4.45 mm screws are on the bottom of the camera.
  • Two 2.95 mm screws are on the left side of the camera, above the USB port.

Using a Phillips #00 screwdriver, remove seven screws located on the outside case of the camera.

One 6.25 mm screw is located on the top right corner, right to the “OK” button.

Four 4.45 mm screws are on the bottom of the camera.

Two 2.95 mm screws are on the left side of the camera, above the USB port.

Step 5

  • Carefully remove the rear camera casing.
  • Carefully remove the front camera casing.

Carefully remove the rear camera casing.

Carefully remove the front camera casing.

Step 6

              Battery Door               
  • Remove loose battery door.

Remove loose battery door.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Odessa                     

Member since: 06/24/2010

55 Reputation

                                      2 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       Cal Poly, Team 2-8, Johann Summer 2010                        

                                                  Member of Cal Poly, Team 2-8, Johann Summer 2010 



                    CPSU-JOHANN-R10S2G8                     


                                            5 Members                     


                                            16 Guides authored