Featured
Featured Guide
Difficulty
Very easy
Steps
4
Time Required
1 - 2 minutes
Sections
3
- Batteries
- 1 step
- Back Case
- 2 steps
- Buttons
- 1 step
Flags
2
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
Featured Guide
This guide has been found to be exceptionally cool by the iFixit staff.
BackKodak EasyShare C913
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Batteries
- Position the camera with the bottom facing up.
- With your finger, slide the battery cover in the direction of open arrow.
- The battery cover will spring open, so be careful to lift it up gently.
Position the camera with the bottom facing up.
With your finger, slide the battery cover in the direction of open arrow.
The battery cover will spring open, so be careful to lift it up gently.
1024
Step 2
Back Case
- Use a Phillips #00 screwdriver to remove the seven 4.5mm screws.
- There are 2 on the left
- There are 2 on the right
- There are 3 on the bottom
Use a Phillips #00 screwdriver to remove the seven 4.5mm screws.
There are 2 on the left
There are 2 on the right
There are 3 on the bottom
Step 3
- Firmly grasp and pull back casing off.
Firmly grasp and pull back casing off.
Step 4
Buttons
- Use #00 screwdriver to pry off buttons.
Use #00 screwdriver to pry off buttons.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 7 other contributors
Alan Galarza
Member since: 10/03/2010
72 Reputation
3 Guides authored
Badges:
7
+4 more badges
Team
Cal Poly, Team 7-51, Amido Fall 2010
Member of Cal Poly, Team 7-51, Amido Fall 2010
CPSU-AMIDO-F10S7G51
4 Members
14 Guides authored
carolnelson - Apr 1, 2017
Reply
Thank you this was very helpful!
