Featured
Featured Guide
Difficulty
Easy
Steps
4
Time Required
5 - 10 minutes
Sections
2
- Batteries
- 2 steps
- Outer Case
- 2 steps
Flags
1
Featured Guide
This guide has been found to be exceptionally cool by the iFixit staff.
BackKodak EasyShare C713
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Batteries
- Use your finger tip to slide battery cover door away from the center of the camera.
- The battery door should spring open.
- If this does not happen, gently open the door lifting from the outer bottom side of the camera.
Use your finger tip to slide battery cover door away from the center of the camera.
The battery door should spring open.
If this does not happen, gently open the door lifting from the outer bottom side of the camera.
1024
Step 2
- Remove the old batteries.
Remove the old batteries.
Step 3
Outer Case
- Remove the seven screws from the outer case with a Phillips #00.
- All screws are 4.45mm.
- There are 2 screws on the port side.
- There are 2 screws on starboard side.
- There are 3 screws on the bottom.
Remove the seven screws from the outer case with a Phillips #00.
All screws are 4.45mm.
There are 2 screws on the port side.
There are 2 screws on starboard side.
There are 3 screws on the bottom.
Step 4
- Make sure the battery cap is “up”.
- Pull the outer case off with your hands.
Make sure the battery cap is “up”.
Pull the outer case off with your hands.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 6 other contributors
Taggart Ashby
Member since: 04/15/2010
345 Reputation
4 Guides authored
Badges:
14
+11 more badges
Team
Cal Poly, Team 26-19, Regan Spring 2010
Member of Cal Poly, Team 26-19, Regan Spring 2010
CPSU-REGAN-S10S26G19
4 Members
14 Guides authored
