Kodak Easyshare C195 Lcd Screen Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          5 - 10 minutes            

Sections

1

• LCD Screen
• 8 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackKodak EasyShare C195

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              LCD Screen               

• To start, remove the Philips #00 4.5 mm screws on both sides of the camera.
• On the bottom, there are three Philips #00 4.5 mm screws. Two are for the front panel and one is for the back panel. To remove the back panel, take out the screws indicated in the final picture of the sequence.

To start, remove the Philips #00 4.5 mm screws on both sides of the camera.

On the bottom, there are three Philips #00 4.5 mm screws. Two are for the front panel and one is for the back panel. To remove the back panel, take out the screws indicated in the final picture of the sequence.

1024

Step 2

• Once all the screws are out, remove the back panel.
• The front panel does not need to be removed for replacing the LCD or the Lens.
• To do this, start by removing the bottom of the panel.

Once all the screws are out, remove the back panel.

The front panel does not need to be removed for replacing the LCD or the Lens.

To do this, start by removing the bottom of the panel.

Step 3

• Once the bottom part is unhooked, unhook the top, and the whole panel should come off.
• Be sure to gently pry the cover off.

Once the bottom part is unhooked, unhook the top, and the whole panel should come off.

Be sure to gently pry the cover off.

Step 4

• In the top right hand corner of the inside of the camera, there is a Philips #00 4 mm screw that needs to be removed.

In the top right hand corner of the inside of the camera, there is a Philips #00 4 mm screw that needs to be removed.

Step 5

• The next step is to remove the white ribbon on the upper right hand corner next to the LCD screen.
• This can be done with or without tweezers.
• The screen is still attached at the bottom, so do not take the screen off yet.

The next step is to remove the white ribbon on the upper right hand corner next to the LCD screen.

This can be done with or without tweezers.

The screen is still attached at the bottom, so do not take the screen off yet.

Step 6

• Carefully pry the top portion of the screen from the camera.
• The screen is still attached to the camera via a yellow ribbon at the bottom of the camera.

Carefully pry the top portion of the screen from the camera.

The screen is still attached to the camera via a yellow ribbon at the bottom of the camera.

Step 7

• To remove the screen completely, push down on the rectangular tab indicated in the picture.

To remove the screen completely, push down on the rectangular tab indicated in the picture.

Step 8

• The LCD screen is now completely removed from the rest of the camera.

The LCD screen is now completely removed from the rest of the camera.

To reassemble your device, follow these instructions in reverse order. NOTE: be sure to put the internal screws on the inside and the external screws on the outside.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 5 other contributors 

                    Alyssa                     

Member since: 04/12/2012

69 Reputation

                                      4 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Cal Poly, Team 6-22, Amido Spring 2012                        

                                                  Member of Cal Poly, Team 6-22, Amido Spring 2012 



                    CPSU-AMIDO-S12S6G22                     


                                            4 Members                     


                                            8 Guides authored