Kodak Easyshare C183 Lens Assembly Replacement Repair Guide

Featured

Featured Guide

Difficulty

Moderate

Steps

7

Time Required

                          30 - 45 minutes            

Sections

1

• Lens
• 7 steps

Flags

2

Featured Guide

This guide has been found to be exceptionally cool by the iFixit staff.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackKodak Easyshare C183

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Lens               

• Remove the batteries, memory card and wrist strap, if so equipped.
• Remove the three Phillips screws on the bottom.
• Remove the two Phillips screws on the right hand side.

Remove the batteries, memory card and wrist strap, if so equipped.

Remove the three Phillips screws on the bottom.

Remove the two Phillips screws on the right hand side.

1024

Step 2

• Remove the two screws on the left hand side.
• Nicely enough, all the screws are the same size. No need to keep them separated.
• Start splitting the case from the battery holder. You can use an opening tool or just your fingernails.

Remove the two screws on the left hand side.

Nicely enough, all the screws are the same size. No need to keep them separated.

Start splitting the case from the battery holder. You can use an opening tool or just your fingernails.

Step 3

• The camera’s front half will come off first.
• Remove the one screw on the top left of the camera. It this holds the back case on to the midframe.
• Remove the back case.

The camera’s front half will come off first.

Remove the one screw on the top left of the camera. It this holds the back case on to the midframe.

Remove the back case.

Step 4

• Gently move the LCD out of the holder. DO NOT TRY TO REMOVE THE LCD. Just fold it over.
• Remove the one screw on the top corner of the holder.
• Remove the ribbon cable from its connector. It is just pushed in. there are not clips to move. Gently pull it straight down.
• Remove the solder that connects the LCD holder to the top logic board.

Gently move the LCD out of the holder. DO NOT TRY TO REMOVE THE LCD. Just fold it over.

Remove the one screw on the top corner of the holder.

Remove the ribbon cable from its connector. It is just pushed in. there are not clips to move. Gently pull it straight down.

Remove the solder that connects the LCD holder to the top logic board.

Step 5

• The LCD holding board and the switches are removed as one unit.
• Open the clip on the LCD ribbon cable connector. Use your fingernails to gently pull it toward the top of the camera.
• Remove the LCD.

The LCD holding board and the switches are removed as one unit.

Open the clip on the LCD ribbon cable connector. Use your fingernails to gently pull it toward the top of the camera.

Remove the LCD.

Step 6

• Open the connectors for the CCD and the lens. Both use a clip that hold the cable is places. Move those gently into the opposite direction of the cables. this will free the cable.
• Remove the two screws that hold the lens in place.
• With the screws and the cables removed, use your fingers and push the lens upward and angled out of the midframe.

Open the connectors for the CCD and the lens. Both use a clip that hold the cable is places. Move those gently into the opposite direction of the cables. this will free the cable.

Remove the two screws that hold the lens in place.

With the screws and the cables removed, use your fingers and push the lens upward and angled out of the midframe.

Step 7

• This is what your final result should look like. the lens is now free from the midframe and a new lens can be easily installed.

This is what your final result should look like. the lens is now free from the midframe and a new lens can be easily installed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    oldturkey03                     

Member since: 09/29/2010

722,317 Reputation

                                      109 Guides authored                  



                       Badges:
                       53







                                                        +50 more badges                           

Team

                       Global Fixers                        

                                                  Member of Global Fixers 



                    Community                     


                                            22 Members                     


                                            240 Guides authored                     

hamid kaker - Oct 17, 2022

Reply

ممنون از اطلاعات تان

oldturkey03 - Oct 17, 2022

خواهش میکنم. امیدوارم کمک کرده باشد.