Difficulty
Moderate
Steps
2
Time Required
1 minute
Sections
1
- Rear Cover
- 2 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackKobo Glo HD
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
This guide applies to the Kobo Glo HD (model N437), but may also apply to the Kobo Touch 2.0 (model N587).
This guide does not apply to the regular Kobo Glo and Touch models.
What you need
Step 1
Rear Cover
- If you haven’t done so already, power off your eReader by holding down the power button for 3 seconds until the display refreshes to indicate that it has powered off.
- Opening picks are required for this step as opening tools can be too wide to get into the gap between the rear cover and the side/front.
- Start by inserting the pick into the area around the power button or Micro USB port.
- Don’t insert it too far, as that could result in damage to the power button, status indicator, and/or Micro USB port.
- Then, slide the pick around to undo these clips.
If you haven’t done so already, power off your eReader by holding down the power button for 3 seconds until the display refreshes to indicate that it has powered off.
Opening picks are required for this step as opening tools can be too wide to get into the gap between the rear cover and the side/front.
Start by inserting the pick into the area around the power button or Micro USB port.
Don’t insert it too far, as that could result in damage to the power button, status indicator, and/or Micro USB port.
Then, slide the pick around to undo these clips.
1024
Step 2
- The rear cover should then pop off.
The rear cover should then pop off.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Kevin Bhasi
Member since: 12/26/2014
1,182 Reputation
9 Guides authored
Badges:
10
+7 more badges