Klh Speaker Tweeter And Driver Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          15 - 25 minutes

Sections

Tweeter and Driver
8 steps

Flags

BackSpeaker
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Tweeter and Driver

Remove the front speaker mesh to expose the speakers. The mesh will lift off without the use of tools.

Remove the front speaker mesh to expose the speakers. The mesh will lift off without the use of tools.

1024

Step 2

Once the mesh is removed, begin to remove the screws securing the small upper speaker/tweeter with a #1 Phillips head screwdriver.

Once the mesh is removed, begin to remove the screws securing the small upper speaker/tweeter with a #1 Phillips head screwdriver.

Step 3

Once the screws have been removed, pry out the small upper speaker with an opening tool.
Take care not to damage the speaker’s wooden body while prying the speaker out.

Once the screws have been removed, pry out the small upper speaker with an opening tool.

Take care not to damage the speaker’s wooden body while prying the speaker out.

Step 4

After you have removed the speaker, disconnect the red and brown wires from the speaker.
You might require needlenose pliers to do this.

After you have removed the speaker, disconnect the red and brown wires from the speaker.

You might require needlenose pliers to do this.

Step 5

Remove the speaker from its plastic bezel using a #1 Phillips head screwdriver.

Remove the speaker from its plastic bezel using a #1 Phillips head screwdriver.

Step 6

For the larger bottom speaker, the same steps will be taken to remove the speaker.
Remove the four screws securing the speaker.

For the larger bottom speaker, the same steps will be taken to remove the speaker.

Remove the four screws securing the speaker.

Step 7

Once the screws are removed, remove the speaker by either prying up from the top, or pushing the speaker through by pushing on the bottom of the speaker.

Once the screws are removed, remove the speaker by either prying up from the top, or pushing the speaker through by pushing on the bottom of the speaker.

Step 8

Once the speaker is removed, remove the black and white wires.

Once the speaker is removed, remove the black and white wires.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 9 other contributors

                    Mark Lee Hensley

Member since: 06/01/2016

126 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Central Coast New Tech High, Team 7-3, Rushing Spring 2016                        

                                                  Member of Central Coast New Tech High, Team 7-3, Rushing Spring 2016 



                    CCNTH-RUSHING-S16S7G3                     


                                            2 Members                     


                                            2 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team