Difficulty

Moderate

Steps

4

Time Required

                          45 minutes

Sections

1

  • Motor
  • 4 steps

Flags

2

Dare To Repair

This guide is a Dare To Repair Contest submission.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackKitchenAid Mixer

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

6 QT. STAND MIXER PROFESSIONAL 600 BOWL LIFT MODELS: KP26M1XMR5 (Meringue) KP26M1XPK5 (Pink) KP26M1XBS5 (Blue Steel) KP26M1XTG5 (Tangerine) KP26M1XCM5 (Cinnamon) 4KP26M1XMR5 (Meringue) KP26M1XDP5 (Dark Pewter) 4KP26M1XBS5 (Blue Steel) KP26M1XLC5 (Licorice) 4KP26M1XDP5 (Dark Pewter) KP26M1XMC5 (Metallic Chrome) 4KP26M1XLC5 (Licorice) KP26M1XNP5 (Nickel Pearl) 4KP26M1XMC5 (Metallic Chrome) KP26M1XPM5 (Pearl Metallic) 4KP26M1XNP5 (Nickel Pearl)

What you need

Step 1

              Motor
  • This Is the Most Common KitchenAid Mixer Malfunction—And How to Fix It

This Is the Most Common KitchenAid Mixer Malfunction—And How to Fix It

1024

Step 2

  • Remove the lid there is one screw at the back holding the band onto the mixer, and four screws holding the lid on.

Remove the lid there is one screw at the back holding the band onto the mixer, and four screws holding the lid on.

Step 3

  • There are four screws holding the motor in place remove them and lift the motor out. Remember to disconnect the wiring connector before you remove the mixer motor from the body.

There are four screws holding the motor in place remove them and lift the motor out. Remember to disconnect the wiring connector before you remove the mixer motor from the body.

Step 4

  • Install the new motor W10247536 number #2 and test it after you reinstall all the screws holding it down. Remember to hook back up the electrical wires before testing the KitchenAid Pro Series Stand Mixer Motor.

Install the new motor W10247536 number #2 and test it after you reinstall all the screws holding it down. Remember to hook back up the electrical wires before testing the KitchenAid Pro Series Stand Mixer Motor.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor 


                    Adam Basaraba

Member since: 02/04/2021

139 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge