Difficulty

Easy

Steps

4

Time Required

                          5 minutes

Sections

1

  • Power Cord
  • 4 steps

Flags

0

  • BackKitchenAid KSM150PSER

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Power Cord
  • Using a Phillips #2 screwdriver, remove the 10mm screw on the back cover by rotating it counterclockwise.
  • The back cover is now free. Remove it by pulling back and up on the cover.

Using a Phillips #2 screwdriver, remove the 10mm screw on the back cover by rotating it counterclockwise.

The back cover is now free. Remove it by pulling back and up on the cover.

1024

Step 2

  • Using a Phillips #2 screwdriver, remove the 5mm screws holding the trimband to the top housing by rotating them counterclockwise.
  • Pull the trimband off the housing by grabbing each side and pulling it off the front.

Using a Phillips #2 screwdriver, remove the 5mm screws holding the trimband to the top housing by rotating them counterclockwise.

Pull the trimband off the housing by grabbing each side and pulling it off the front.

Step 3

  • Using a Phillips #2 screwdriver, remove the 12mm screw holding the grounding wire in place by rotating it counterclockwise.
  • Using pliers or tweezers, remove the connectors attached to the white and black wires.

Using a Phillips #2 screwdriver, remove the 12mm screw holding the grounding wire in place by rotating it counterclockwise.

Using pliers or tweezers, remove the connectors attached to the white and black wires.

Step 4

  • Using a screwdriver, pull the cord string relief out of the mixer by putting it behind the cord and pulling away from the mixer until it is free.
  • Remove the cord from the mixer body.

Using a screwdriver, pull the cord string relief out of the mixer by putting it behind the cord and pulling away from the mixer until it is free.

Remove the cord from the mixer body.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Max Prohorov

Member since: 01/24/2018

109 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       Cal Poly, Team S2-G5, Livingston Winter 2018                        

                                                  Member of Cal Poly, Team S2-G5, Livingston Winter 2018 



                    CPSU-LIVINGSTON-W18S2G5                     


                                            4 Members                     


                                            10 Guides authored