Difficulty

Easy

Steps

4

Time Required

                          15 minutes

Sections

1

  • Circuit Board
  • 4 steps

Flags

0

  • BackKitchenAid KSM150PSER

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Circuit Board
  • Using a Phillips #2 screwdriver, remove the 10mm screw on the back cover by rotating it counterclockwise.
  • The back cover is now free. Remove it by pulling it back and up.
  • Ensure that the mixer is disconnected from any electrical source prior to removing the back cover.

Using a Phillips #2 screwdriver, remove the 10mm screw on the back cover by rotating it counterclockwise.

The back cover is now free. Remove it by pulling it back and up.

Ensure that the mixer is disconnected from any electrical source prior to removing the back cover.

1024

Step 2

  • Using a Phillips #1 screwdriver, remove the 9.5mm screw above the circuit board by rotating it counterclockwise.
  • If you can’t see the screw, try pulling the seal down past the wires to make the screw more accessible.

Using a Phillips #1 screwdriver, remove the 9.5mm screw above the circuit board by rotating it counterclockwise.

If you can’t see the screw, try pulling the seal down past the wires to make the screw more accessible.

Step 3

  • Using pliers or tweezers, remove the connectors of the four wires attached to the circuit board.

Using pliers or tweezers, remove the connectors of the four wires attached to the circuit board.

Step 4

  • Grab the wires and tilt the edge of the board up to lift the circuit board up and out.

Grab the wires and tilt the edge of the board up to lift the circuit board up and out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 5 other contributors 


                    Luke Leonard

Member since: 01/24/2018

517 Reputation

                                      2 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Cal Poly, Team S2-G5, Livingston Winter 2018                        

                                                  Member of Cal Poly, Team S2-G5, Livingston Winter 2018 



                    CPSU-LIVINGSTON-W18S2G5                     


                                            4 Members                     


                                            10 Guides authored