Difficulty
Easy
Steps
2
Time Required
1 minute
Sections
1
- Carbon Brushes
- 2 steps
Flags
0
BackKitchenAid KSM150PSER
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Carbon Brushes
- Using a flat head screwdriver, unscrew the brush cap on each side of the mixer by turning them counter clockwise.
- Remove brush cap by pulling it toward you.
- The brushes are held in by springs and will fly out if removed too fast.
Using a flat head screwdriver, unscrew the brush cap on each side of the mixer by turning them counter clockwise.
Remove brush cap by pulling it toward you.
The brushes are held in by springs and will fly out if removed too fast.
1024
Step 2
- Remove brush by pulling it toward you.
- One corner of the brush is flattened. You can check which way the brush is oriented by shining a flashlight inside the hole.
Remove brush by pulling it toward you.
One corner of the brush is flattened. You can check which way the brush is oriented by shining a flashlight inside the hole.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
Author
with 2 other contributors
Hayley Young
Member since: 12/03/2016
190 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
Cal Poly, Team S2-G5, Livingston Winter 2018
Member of Cal Poly, Team S2-G5, Livingston Winter 2018
CPSU-LIVINGSTON-W18S2G5
4 Members
10 Guides authored
Amber Reimer - Dec 29, 2019
Reply
I’ve been procrastinating on trying to fix my KA mixer on my own…today I did it. The directions were pretty clear and the only thing wrong was that when I had previously cleaned my mixer, I put the carbon brushes in the wrong way. Once I shined a flashlight into the hole I could see where the notched corner went.
