Kitchenaid Khm512Er Beater Rings Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Sections

Beater Rings
5 steps

Flags

BackKitchenAid KHM512ER
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Beater Rings

Insert the back of a plastic opening tool into one of the beater holes
Apply force to pull the circular plastic part off.
If necessary, use the other side of the plastic opening tool to pry the circular plastic part off.

Insert the back of a plastic opening tool into one of the beater holes

Apply force to pull the circular plastic part off.

If necessary, use the other side of the plastic opening tool to pry the circular plastic part off.

1024

Step 2

Use a Phillips #2 screwdriver to remove the two 20mm screws holding the bottom plastic piece in place.
Remove the bottom plastic piece using a plastic opening tool.

Use a Phillips #2 screwdriver to remove the two 20mm screws holding the bottom plastic piece in place.

Remove the bottom plastic piece using a plastic opening tool.

Step 3

Using a Phillips 2 screwdriver, remove the three 20.0mm screws holding the motor assembly in place.
Use your hands to remove the motor assembly.

Using a Phillips 2 screwdriver, remove the three 20.0mm screws holding the motor assembly in place.

Use your hands to remove the motor assembly.

Step 4

Firmly grip the motor in your hand. Using pliers, pull the connectors off the motors.
Some force may be required. Be careful not to cut yourself on any electrical components.

Firmly grip the motor in your hand. Using pliers, pull the connectors off the motors.

Some force may be required. Be careful not to cut yourself on any electrical components.

Step 5

Lie the motor down flat on a table.
Using a pair of tweezers, remove the ring from the plastic knob.

Lie the motor down flat on a table.

Using a pair of tweezers, remove the ring from the plastic knob.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 3 other contributors

                    Brad Daniels

Member since: 02/10/2016

561 Reputation

                                      3 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       USF Tampa, Team 2-3, Sullivan Spring 2016                        

                                                  Member of USF Tampa, Team 2-3, Sullivan Spring 2016 



                    USFT-SULLIVAN-S16S2G3                     


                                            3 Members                     


                                            4 Guides authored

joescherzo - Jun 17, 2017

Anyone know of a site that sells replacement beater gears?

M Stevens - Aug 17, 2017

Nice set by step process but where does one get the rings?

Yvette Tower - Jul 23, 2020

try Sears parts.com

Introduction#

What you need#

Team#

Introduction

What you need

Team