Difficulty

Moderate

Steps

12

Time Required

                          10 minutes

Sections

1

  • Kitchen Scale (CM-103/10672Z) Disassembly
  • 12 steps

Flags

0

  • BackKitchen scale (CM-103 10672Z)

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Kitchen Scale (CM-103/10672Z) Disassembly
  • Remove the battery cover and batteries.

Remove the battery cover and batteries.

1024

Step 2

  • Peel off the information sticker.

Peel off the information sticker.

Step 3

  • Unscrew the ten screws (countersunk cross head 1,5 mm; 8 mm).

Unscrew the ten screws (countersunk cross head 1,5 mm; 8 mm).

Step 4

  • Remove the black back cover.

Remove the black back cover.

Step 5

  • Remove the tape which holds the electrical wires in place.

Remove the tape which holds the electrical wires in place.

Step 6

  • Push down the click fingers and slide out the feet.

Push down the click fingers and slide out the feet.

Step 7

  • Remove the backlight from the screen.

Remove the backlight from the screen.

Step 8

  • Unscrew the 5 screws from the PCB and screen (round cross head 1,5 mm; 6 mm).

Unscrew the 5 screws from the PCB and screen (round cross head 1,5 mm; 6 mm).

Step 9

  • Lift out the PCB and screen.

Lift out the PCB and screen.

Step 10

  • Pry out the PCBs which include the touch sensors (2).

Pry out the PCBs which include the touch sensors (2).

Step 11

  • Lift out the complete electronic circuit and remove the screen and connector.

Lift out the complete electronic circuit and remove the screen and connector.

Step 12

  • Pry off the metal cover from the top of the kitchen scale.
  • Remove the glass screen cover.

Pry off the metal cover from the top of the kitchen scale.

Remove the glass screen cover.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Floris

Member since: 03/05/2018

205 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Delft University of Technology, Team S2-G2, Flipsen Winter 2018                        

                                                  Member of Delft University of Technology, Team S2-G2, Flipsen Winter 2018 



                    TUD-FLIPSEN-W18S2G2                     


                                            1 Member                     


                                            1 Guide authored