Kindle Voyage Vibrator Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 - 10 minutes

Sections

Back Panel
4 steps
Vibrator
2 steps

Flags

BackKindle Voyage
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Panel

Insert a plastic opening tool between the plastic panel shown on the device.
Use the tool to pry the plastic away from the device.
There will be adhesive holding this piece of plastic to the device. You may have to pull pretty hard to get it separated.

Insert a plastic opening tool between the plastic panel shown on the device.

Use the tool to pry the plastic away from the device.

There will be adhesive holding this piece of plastic to the device. You may have to pull pretty hard to get it separated.

1024

Step 2

Use an aluminum driver attached with a Phillips head size #00 to remove the four 3mm screws shown in the picture. For reassembly, note that the top two and bottom two screws are different sizes.

Use an aluminum driver attached with a Phillips head size #00 to remove the four 3mm screws shown in the picture. For reassembly, note that the top two and bottom two screws are different sizes.

Step 3

Once the screws are removed, the back panel can slide off the device.

Once the screws are removed, the back panel can slide off the device.

Step 4

Remove the magnetic component with the magnetic head of the aluminum driver.

Remove the magnetic component with the magnetic head of the aluminum driver.

Step 5

              Vibrator

Use tweezers to pinch in the sides of the vibrator cable and slide it out of its housing.

Use tweezers to pinch in the sides of the vibrator cable and slide it out of its housing.

Step 6

Gently peel the vibrator off of the device.

Gently peel the vibrator off of the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors

                    Sean Yap

Member since: 01/22/2015

1,169 Reputation

                                      6 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges

Team

                       Cal Poly, Team 19-12, Maness Winter 2015                        

                                                  Member of Cal Poly, Team 19-12, Maness Winter 2015 



                    CPSU-MANESS-W15S19G12                     


                                            5 Members                     


                                            6 Guides authored

Sharon Crowley - Nov 25, 2017

OK, the procedure seems straightforward enough, but you say “no parts required” when you actually do need to buy the replacement parts for the pieces that are no longer functioning. Where can you buy these parts?

Introduction#

What you need#

Team#

Introduction

What you need

Team