Kindle Voyage Back Panel Replacement Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          3 minutes            

Sections

1

• Back Panel
• 4 steps

Flags

0

• BackKindle Voyage

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Panel               

• Insert a plastic opening tool between the plastic panel shown on the device.
• Use the tool to pry the plastic away from the device.
• There will be adhesive holding this piece of plastic to the device. You may have to pull pretty hard to get it separated.

Insert a plastic opening tool between the plastic panel shown on the device.

Use the tool to pry the plastic away from the device.

There will be adhesive holding this piece of plastic to the device. You may have to pull pretty hard to get it separated.

1024

Step 2

• Use an aluminum driver attached with a Phillips head size #00 to remove the four 3mm screws shown in the picture. For reassembly, note that the top two and bottom two screws are different sizes.

Use an aluminum driver attached with a Phillips head size #00 to remove the four 3mm screws shown in the picture. For reassembly, note that the top two and bottom two screws are different sizes.

Step 3

• Once the screws are removed, the back panel can slide off the device.

Once the screws are removed, the back panel can slide off the device.

Step 4

• Remove the magnetic component with the magnetic head of the aluminum driver.

Remove the magnetic component with the magnetic head of the aluminum driver.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 5 other contributors 

                    Sean Yap                     

Member since: 01/22/2015

1,169 Reputation

                                      6 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges                           

Team

                       Cal Poly, Team 19-12, Maness Winter 2015                        

                                                  Member of Cal Poly, Team 19-12, Maness Winter 2015 



                    CPSU-MANESS-W15S19G12                     


                                            5 Members                     


                                            6 Guides authored                     

Hannah BP - Mar 21, 2016

Reply

I’m having trouble getting the last two clips to snap back together on the top of the device. I’m pinching them together at the top, but nothing happens. It doesn’t seem like it should be this difficult. What do you advise? Thanks!

Sylvia Liemer - Apr 30, 2017

Reply

I have the same problem. It would be very helpful to get a tip here.

panthalas15 - Jun 30, 2017

Reply

I ’m having the same problem with Hanna:

I’ having trouble getting the last two clips to snap back together on the top of the device. I’m pinching them together at the top, but nothing happens. It doesn’t seem like it should be this difficult. What do you advise? Thanks!

Patrick Cohen (ig88b) - Nov 24, 2018

Years later, but I just replaced the battery in mine and figured this out. You have to align the top clips first (and may have to lightly pry them open before you do that). Then bow the piece of plastic slightly and get the bottom clips in.