Difficulty
Moderate
Steps
4
Time Required
10 minutes
Sections
2
- Back Cover
- 2 steps
- Bezel
- 2 steps
Flags
0
BackKindle Touch
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Use the plastic opening tool to undo the ten plastic clips around the back panel of the Kindle.
Use the plastic opening tool to undo the ten plastic clips around the back panel of the Kindle.
1024
Step 2
- Gently lift the bottom and slide the panel off.
Gently lift the bottom and slide the panel off.
Step 3
Bezel
- Using a Phillips #00 screwdriver, remove the six 4 mm screws to access the front plate.
Using a Phillips #00 screwdriver, remove the six 4 mm screws to access the front plate.
Step 4
- Use the plastic opening tool to pry the bezel from the top and sides
- The bottom of the bezel will be glued, so be careful when sliding the clips out.
- The clips can be easily bent, so do not try to force them out. If you do bend some, they can be bent back.
Use the plastic opening tool to pry the bezel from the top and sides
The bottom of the bezel will be glued, so be careful when sliding the clips out.
The clips can be easily bent, so do not try to force them out. If you do bend some, they can be bent back.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 6 other contributors
Jerome Narine
Member since: 01/20/2015
221 Reputation
1 Guide authored
Badges:
8
+5 more badges
Team
USF Tampa, Team 19-5, Blackwell Winter 2015
Member of USF Tampa, Team 19-5, Blackwell Winter 2015
USFT-BLACKWELL-W15S19G5
3 Members
8 Guides authored
denianyc - Mar 14, 2016
Reply
I want to paint The bezel white. Will it come back and fit perfectly after the removal I have to make?