Difficulty
Easy
Steps
4
Time Required
20 minutes
Sections
1
- Screen
- 4 steps
Flags
0
BackKindle Paperwhite 2nd Generation
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Screen
- Insert plastic opening tool into the corners of the Paperwhite and slide around the edge perimeter to remove bezel.
- Be sure to begin prying along the edges, these are the optimal points for removing the bezel.
Insert plastic opening tool into the corners of the Paperwhite and slide around the edge perimeter to remove bezel.
Be sure to begin prying along the edges, these are the optimal points for removing the bezel.
1024
Step 2
- Remove the eleven 3.2 mm Phillips 000 screws from corners of mid-frame and from behind the black strip as shown.
- Do not forget the screw in the middle of the black adhesive strip.
Remove the eleven 3.2 mm Phillips 000 screws from corners of mid-frame and from behind the black strip as shown.
Do not forget the screw in the middle of the black adhesive strip.
Step 3
- Carefully lift and remove the mid-frame.
Carefully lift and remove the mid-frame.
Step 4
- The screen itself is glued to the mid-frame. If your replacement screen does not include the mid-frame, heat the screen with an iOpener and gently pry it from the mid-frame with a blue plastic opening tool.
The screen itself is glued to the mid-frame. If your replacement screen does not include the mid-frame, heat the screen with an iOpener and gently pry it from the mid-frame with a blue plastic opening tool.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
Author
with 4 other contributors
Tyler Davis
Member since: 09/15/2016
1,455 Reputation
5 Guides authored
Badges:
18
+15 more badges
Team
USF Tampa, Team 11-2, Blackwell Fall 2016
Member of USF Tampa, Team 11-2, Blackwell Fall 2016
USFT-BLACKWELL-F16S11G2
4 Members
6 Guides authored
FoxRunTime - Feb 24, 2017
Reply
My opening tool is orange. Will this still work for me?
Liam Cahill - Jul 9, 2019
Reply
I’m hoping to replace my screen with this part:
Kindle Paperwhite (2nd Gen) Display
Does this part include the mid-frame? I would like to avoid using the iOpener if possible.
Thank you!