Difficulty

Moderate

Steps

4

Time Required

                          5 minutes

Sections

2

  • Back Panel
  • 2 steps
  • Rear Facing Camera
  • 2 steps

Flags

0

  • BackKindle Fire HD 6

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • Place the device face down on a clean cloth or another smooth surface.
  • In the following steps, you will need to apply some force to your device. If your device is on a rough surface, you may scratch the screen.
  • Insert the plastic opening tool between the device’s front and back panels. You might need to wiggle the tool up and down to wedge it in the gap.
  • Maneuver the tool around the device until the back unclips from the front panel.

Place the device face down on a clean cloth or another smooth surface.

In the following steps, you will need to apply some force to your device. If your device is on a rough surface, you may scratch the screen.

Insert the plastic opening tool between the device’s front and back panels. You might need to wiggle the tool up and down to wedge it in the gap.

Maneuver the tool around the device until the back unclips from the front panel.

1024

Step 2

  • Carefully separate the back panel from the rest of the device internals.

Carefully separate the back panel from the rest of the device internals.

Step 3

              Rear Facing Camera
  • Unscrew the two 3.5mm T5 Torx Screws from the top of the camera.

Unscrew the two 3.5mm T5 Torx Screws from the top of the camera.

Step 4

  • Be careful not to damage the camera lens as you remove the camera.
  • Gently pull the camera up and out of the device. As you pull, unclip the black and white connector with orange tape by popping it off at its base.

Be careful not to damage the camera lens as you remove the camera.

Gently pull the camera up and out of the device. As you pull, unclip the black and white connector with orange tape by popping it off at its base.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Cassandra Beck

Member since: 01/13/2015

870 Reputation

                                      5 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges

Team

                       Cal Poly, Team 70-4, Forte Winter 2015                        

                                                  Member of Cal Poly, Team 70-4, Forte Winter 2015 



                    CPSU-FORTE-W15S70G4                     


                                            4 Members                     


                                            12 Guides authored