Difficulty
Moderate
Steps
5
Time Required
15 minutes
Sections
1
- Camera
- 5 steps
Flags
0
- History
- Save to Favorites
- Download PDF
- Edit
- Translate
- Get Shareable Link
- Embed This Guide
- Notify Me of Changes
- Stop Notifications
Introduction
What you need
Step 1
Camera
- Pry open the case using the iFixit opening tool.
- Make sure to go around the whole case before removing the whole case.
Pry open the case using the iFixit opening tool.
Make sure to go around the whole case before removing the whole case.
1024
Step 2
- Remove yellow tape covering the connecter.
Remove yellow tape covering the connecter.
Step 3
- Gently flip over the black latch with the iFixit opening tool. Disconnect the camera’s connector to the circuit board.
Gently flip over the black latch with the iFixit opening tool. Disconnect the camera’s connector to the circuit board.
Step 4
- Remove the rubber casing around the camera lens using a set of tweezers.
Remove the rubber casing around the camera lens using a set of tweezers.
Step 5
- Remove and pull off the camera lens.
Remove and pull off the camera lens.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
William Hess
Member since: 10/11/2019
609 Reputation
3 Guides authored
Badges:
11
+8 more badges
Team
Embry-Riddle Aeronautical University, Team S1-G5, Watkins Fall 2019
Member of Embry-Riddle Aeronautical University, Team S1-G5, Watkins Fall 2019
ERAU-WATKINS-F19S1G5
4 Members
10 Guides authored
Victoria Feldman - Jul 9, 2022
Reply
Where can I buy the lens?