Difficulty

Moderate

Steps

11

Time Required

Suggest a time??

Sections

2

  • Batteries
  • 4 steps
  • Internal Chip
  • 7 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackKid Galaxy Morphibians Explorer Controller

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Batteries
  • Turn the controller over to the backside and locate the battery cover screw.

Turn the controller over to the backside and locate the battery cover screw.

1024

Step 2

  • The battery cover 8.0mm Phillips #2 screw is on the bottom left handle. There is a plastic washer holding the screw to the cover, so completely loosen the screw, but do not remove.

The battery cover 8.0mm Phillips #2 screw is on the bottom left handle. There is a plastic washer holding the screw to the cover, so completely loosen the screw, but do not remove.

Step 3

  • Once the screw is removed lift the battery cover up from the controller.

Once the screw is removed lift the battery cover up from the controller.

Step 4

  • Remove the 2 AA batteries.

Remove the 2 AA batteries.

Step 5

              Internal Chip
  • Remove both 6.0mm Phillips #1 screws holding the D-pads in place.

Remove both 6.0mm Phillips #1 screws holding the D-pads in place.

Step 6

  • Insert wisdom here.

Insert wisdom here.

Step 7

  • Remove the six 8.1 Phillips #1 screws.

Remove the six 8.1 Phillips #1 screws.

Step 8

  • Lift the antenna holder away from the controller towards the top of the antenna.

Lift the antenna holder away from the controller towards the top of the antenna.

Step 9

  • Before you separate both halves of the controller make sure the battery holder is facing you so the D-pads stay in place.
  • Separate both halves of the controller.

Before you separate both halves of the controller make sure the battery holder is facing you so the D-pads stay in place.

Separate both halves of the controller.

Step 10

  • Remove the 7.9 Phillips #1 screw that holds both the antenna and the internal chip.

Remove the 7.9 Phillips #1 screw that holds both the antenna and the internal chip.

Step 11

  • Remove the internal chip by pulling it away from the controller.
  • Remove both the positive(red wire) and negative(black wire) from the battery terminals.
  • Reverse the steps to put everything back together.

Remove the internal chip by pulling it away from the controller.

Remove both the positive(red wire) and negative(black wire) from the battery terminals.

Reverse the steps to put everything back together.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 7 other contributors 


                    Rusbell Gonzalez

Member since: 09/17/2014

219 Reputation

                                      5 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       USF Tampa, Team 1-2, Hickman Fall 2014                        

                                                  Member of USF Tampa, Team 1-2, Hickman Fall 2014 



                    USFT-HICKMAN-F14S1G2                     


                                            3 Members                     


                                            7 Guides authored