Difficulty

Moderate

Steps

11

Time Required

                          15 - 20 minutes

Sections

3

  • K-cup holder
  • 4 steps
  • Top
  • 5 steps
  • Top Needle
  • 2 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackKeurig Mini B-31

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              K-cup holder
  • Lift up the handle of the Keurig Mini.

Lift up the handle of the Keurig Mini.

1024

Step 2

  • Make sure to avoid the needles above and inside the K-cup because may puncture your hand
  • Firmly place a finger on each one of the three tabs that hold the K-cup holder into place, pushing in lightly. The tabs are difficult to see, but they are there and will make the removal easier. The top tab is located in the same location as the white triangle and the bottom two are located under the plastic bumps highlighted in the picture.

Make sure to avoid the needles above and inside the K-cup because may puncture your hand

Firmly place a finger on each one of the three tabs that hold the K-cup holder into place, pushing in lightly. The tabs are difficult to see, but they are there and will make the removal easier. The top tab is located in the same location as the white triangle and the bottom two are located under the plastic bumps highlighted in the picture.

Step 3

  • Firmly rock the K-cup holder from side to side, loosening the K-cup holder from its seat.

Firmly rock the K-cup holder from side to side, loosening the K-cup holder from its seat.

Step 4

  • Pull the K-cup holder straight out.

Pull the K-cup holder straight out.

Step 5

              Top
  • Open the top lid of the Keurig.
  • Pull directly outwards on one of the arms that holds the top lid in place. It will take some force to get the arm off the peg. Once one side is off, repeat the process on the second arm.

Open the top lid of the Keurig.

Pull directly outwards on one of the arms that holds the top lid in place. It will take some force to get the arm off the peg. Once one side is off, repeat the process on the second arm.

Step 6

  • Lay the Keurig on its back with the water reservoir pointing away from you.

Lay the Keurig on its back with the water reservoir pointing away from you.

Step 7

  • Avoid the top needle as it may puncture your hand.
  • Unscrew the two 9mm #1 Philips screws that hold the top plastic cover in place.

Avoid the top needle as it may puncture your hand.

Unscrew the two 9mm #1 Philips screws that hold the top plastic cover in place.

Step 8

  • Set the Keurig in an upright position with the front side facing you.
  • Pull the cover off the top of the Keurig. It should come off easily with little force.

Set the Keurig in an upright position with the front side facing you.

Pull the cover off the top of the Keurig. It should come off easily with little force.

Step 9

  • Firmly grasp the hose and pull it off of the plastic nozzle.

Firmly grasp the hose and pull it off of the plastic nozzle.

Step 10

              Top Needle
  • Unscrew the two 9 mm #1 Philips screws at the top of the device.

Unscrew the two 9 mm #1 Philips screws at the top of the device.

Step 11

  • Push down lightly on the nozzle that the hose was attached to. The plastic housing along with the needle should pop off without much force.

Push down lightly on the nozzle that the hose was attached to. The plastic housing along with the needle should pop off without much force.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 5 other contributors 


                    Andrew Adriance

Member since: 01/14/2014

1,890 Reputation

                                      7 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges

Team

                       Cal Poly, Team 17-1, Forte Winter 2014                        

                                                  Member of Cal Poly, Team 17-1, Forte Winter 2014 



                    CPSU-FORTE-W14S17G1                     


                                            5 Members                     


                                            17 Guides authored

Jen - Sep 26, 2015

Reply

This is great but where do I buy the top needle replacement part?