Difficulty

Very easy

Steps

4

Time Required

                          5 minutes            

Sections

1

  • K-cup holder
  • 4 steps

Flags

0

  • BackKeurig Mini B-31

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              K-cup holder               
  • Lift up the handle of the Keurig Mini.

Lift up the handle of the Keurig Mini.

1024

Step 2

  • Make sure to avoid the needles above and inside the K-cup because may puncture your hand
  • Firmly place a finger on each one of the three tabs that hold the K-cup holder into place, pushing in lightly. The tabs are difficult to see, but they are there and will make the removal easier. The top tab is located in the same location as the white triangle and the bottom two are located under the plastic bumps highlighted in the picture.

Make sure to avoid the needles above and inside the K-cup because may puncture your hand

Firmly place a finger on each one of the three tabs that hold the K-cup holder into place, pushing in lightly. The tabs are difficult to see, but they are there and will make the removal easier. The top tab is located in the same location as the white triangle and the bottom two are located under the plastic bumps highlighted in the picture.

Step 3

  • Firmly rock the K-cup holder from side to side, loosening the K-cup holder from its seat.

Firmly rock the K-cup holder from side to side, loosening the K-cup holder from its seat.

Step 4

  • Pull the K-cup holder straight out.

Pull the K-cup holder straight out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.                                             

Author

                                      with 5 other contributors 

                    Andrew Adriance                     

Member since: 01/14/2014

1,890 Reputation

                                      7 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges                           

Team

                       Cal Poly, Team 17-1, Forte Winter 2014                        

                                                  Member of Cal Poly, Team 17-1, Forte Winter 2014 



                    CPSU-FORTE-W14S17G1                     


                                            5 Members                     


                                            17 Guides authored                     

jastpeel - Nov 25, 2019

Reply

Press up on the outlet of the holder to push it out. This is covered in the manufacturer’s user manual which comes with the unit when new.

See here for k-cup holder removal.

https://www.manualslib.com/manual/257886