Difficulty

Easy

Steps

5

Time Required

                          10 minutes

Sections

1

  • Limit Switch
  • 5 steps

Flags

0

  • BackKeurig K70

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Limit Switch
  • Open the K-Cup Holder by lifting the handle.

Open the K-Cup Holder by lifting the handle.

1024

Step 2

  • While looking upwards from underneath the Keurig, remove the two 8mm Phillips #2 screws from underneath the black plastic “shroud”.

While looking upwards from underneath the Keurig, remove the two 8mm Phillips #2 screws from underneath the black plastic “shroud”.

Step 3

  • Remove the black plastic “shroud” by pushing inwards and then pulling upwards to disengage the plastic hooks that are not visible.

Remove the black plastic “shroud” by pushing inwards and then pulling upwards to disengage the plastic hooks that are not visible.

Step 4

  • Remove the two 10mm Phillips #1 screws from the switch.

Remove the two 10mm Phillips #1 screws from the switch.

Step 5

  • Remove the switch by cuting the two connecting wires. Reconnect a replacement switch using this guide to join wires with solder, or using this guide to solder connections, or by using any other technique to connect wires.

Remove the switch by cuting the two connecting wires. Reconnect a replacement switch using this guide to join wires with solder, or using this guide to solder connections, or by using any other technique to connect wires.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Kyle Maxwell

Member since: 10/06/2016

163 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Cal Poly, Team 20-4, Livingston Fall 2016                        

                                                  Member of Cal Poly, Team 20-4, Livingston Fall 2016 



                    CPSU-LIVINGSTON-F16S20G4                     


                                            4 Members                     


                                            5 Guides authored