Difficulty
Difficult
Steps
3
Time Required
25 - 30 minutes
Sections
1
- Power Cable
- 3 steps
Flags
0
BackKeurig K55
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Power Cable
- Access the bottom of the Keurig by flipping it on its side.
Access the bottom of the Keurig by flipping it on its side.
1024
Step 2
- Remove the five 13mm Phillips #0 screws securing the bottom case.
- Pull the silver cover off of the device.
Remove the five 13mm Phillips #0 screws securing the bottom case.
Pull the silver cover off of the device.
Step 3
- To remove the power cable, highlighted in red, follow iFixit’s guide on soldering.
- The ground cable, highlighted in orange, needs to be re-soldered to your new power cable.
To remove the power cable, highlighted in red, follow iFixit’s guide on soldering.
The ground cable, highlighted in orange, needs to be re-soldered to your new power cable.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
William O'Brien
Member since: 01/23/2018
500 Reputation
4 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team S1-G3, Livingston Winter 2018
Member of Cal Poly, Team S1-G3, Livingston Winter 2018
CPSU-LIVINGSTON-W18S1G3
4 Members
5 Guides authored
