Keurig K10 Mini Plus Top Needle Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Sections

Cup Holder
2 steps
Top Needle
3 steps

Flags

BackKeurig K10 Mini Plus
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Cup Holder

Press on tab while pulling up on K-cup until you hear a click. Repeat for the remaining tabs. We found using the smallest of the “plastic opening tools” worked wonders.

Press on tab while pulling up on K-cup until you hear a click. Repeat for the remaining tabs. We found using the smallest of the “plastic opening tools” worked wonders.

1024

Step 2

Once all of the tabs have been pressed, the K-Cup should just pop out. After, you just pull the remainder of the K-Cup. You have successfully removed the K-Cup.

Once all of the tabs have been pressed, the K-Cup should just pop out. After, you just pull the remainder of the K-Cup. You have successfully removed the K-Cup.

Step 3

              Top Needle

Remove two 9 mm Phillips #1 screws.
Avoid the top needle if at all possible. The needle may cut you and/or penetrate your skin.
The screws are located on the top of where the K-Cup would be.

Remove two 9 mm Phillips #1 screws.

Avoid the top needle if at all possible. The needle may cut you and/or penetrate your skin.

The screws are located on the top of where the K-Cup would be.

Step 4

Once you remove the screws, the top cover should come out.
You will then want to remove these screws which are the same size.
The needle is sharp, so be careful.

Once you remove the screws, the top cover should come out.

You will then want to remove these screws which are the same size.

The needle is sharp, so be careful.

Step 5

Once you get those removed, you are going to want to pull on the hose until it pops off.
Once the hose comes off, the needle will fall out by itself.
Be careful when picking up the needle as the needle is sharp.

Once you get those removed, you are going to want to pull on the hose until it pops off.

Once the hose comes off, the needle will fall out by itself.

Be careful when picking up the needle as the needle is sharp.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors

                    Mark Henein

Member since: 02/04/2016

369 Reputation

                                      2 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       USF Tampa, Team 17-6, Blackwell Winter 2016                        

                                                  Member of USF Tampa, Team 17-6, Blackwell Winter 2016 



                    USFT-BLACKWELL-W16S17G6                     


                                            2 Members                     


                                            2 Guides authored

tbushwacker - Jan 13, 2018

Where do you buy the needle I know you can get the exit needle with the holder, but can’t find this one.

Introduction#

What you need#

Team#

Introduction

What you need

Team