Keurig B70 Platinum Water Filter Replacement Repair Guide

Difficulty

Very easy

Steps

3

Time Required

                          5 minutes            

Sections

1

• Water Filter
• 3 steps

Flags

0

• BackKeurig B70 Platinum

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

This guide will show you how to remove the water filter found inside the Keurig B70 Platinum water reservoir.

You will only need a Phillips #2 screwdriver for this guide.

What you need

Step 1

              Water Filter               

• Remove the water reservoir from the Keurig by lifting it upwards and pulling it outwards.
• Be sure to empty the reservoir before continuing to the next step.

Remove the water reservoir from the Keurig by lifting it upwards and pulling it outwards.

Be sure to empty the reservoir before continuing to the next step.

1024

Step 2

• Remove the three 11.0 mm screws from the reservoir filter.
• You may need to use tweezers to pull out the screws.

Remove the three 11.0 mm screws from the reservoir filter.

You may need to use tweezers to pull out the screws.

Step 3

• Firmly twist the filter counterclockwise to remove it.
• When adding the replacement filter, make sure the filter lines up with the screw holes.

Firmly twist the filter counterclockwise to remove it.

When adding the replacement filter, make sure the filter lines up with the screw holes.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Emily Ramirez                     

Member since: 10/14/2018

97 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       UW Tacoma, Team S1-G6, Rose Fall 2018                        

                                                  Member of UW Tacoma, Team S1-G6, Rose Fall 2018 



                    UWT-ROSE-F18S1G6                     


                                            4 Members                     


                                            5 Guides authored                     

Joan - May 6, 2020

Reply

What are the two items inside the water resin?

There is the round item, and next to it an oblong item. I am really confused

I just ordered a filter starter kit. Do I just insert the kit on top of the round item?