Difficulty
Moderate
Steps
7
Time Required
10 - 25 minutes
Sections
1
- Check Valve
- 7 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackKeurig B70 Platinum
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Before continuing, make sure you unplug your machine and have a Phillips screwdriver and a pair of scissors handy.
What you need
Step 1
Check Valve
- Lift up the top lid.
- Remove the two screws with a Phillips #0 screwdriver.
Lift up the top lid.
Remove the two screws with a Phillips #0 screwdriver.
1024
Step 2
- Push down on the lid.
- Lift up and remove the lid.
Push down on the lid.
Lift up and remove the lid.
Step 3
- Using the Phillips #0 screwdriver, remove the two screws holding the tubing to the puncture needle.
Using the Phillips #0 screwdriver, remove the two screws holding the tubing to the puncture needle.
Step 4
- Twist and pull to disconnect the valve on that side.
Twist and pull to disconnect the valve on that side.
Step 5
- On the other side, cut the one zip tie closest to the valve.
On the other side, cut the one zip tie closest to the valve.
Step 6
- Twist and pull to disconnect valve on the other side.
Twist and pull to disconnect valve on the other side.
Step 7
- Reassemble the valve in place.
- Resecure it with a zip tie.
- Trim the excess plastic off of the zip tie.
Reassemble the valve in place.
Resecure it with a zip tie.
Trim the excess plastic off of the zip tie.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Ashlan Pate
Member since: 10/26/2021
163 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
University of North Texas, Team 4-1, Thomas Fall 2021
Member of University of North Texas, Team 4-1, Thomas Fall 2021
UNT-THOMAS-F21S4G1
3 Members
1 Guide authored