Difficulty
Easy
Steps
4
Time Required
5 - 10 minutes
Sections
1
- Brewer Handle
- 4 steps
Flags
0
BackKeurig B70 Platinum
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
This guide will show you how to remove and replace the brewer handle for the Keurig B70 Platinum if you’re experiencing any problems with the handle. Before continuing with the guide, you’re going to need a Phillips #2 screwdriver and T15 Torx screwdriver.
What you need
Step 1
Brewer Handle
- Turn off and unplug the Keurig before starting.
- Lay the Keurig on its back and open the lid.
- Using a Phillips #2 screwdriver, remove the two 21.0 mm screws.
- Be careful when removing the screws. There is a sharp puncture needle!
- You may need to use tweezers to get the screws out.
Turn off and unplug the Keurig before starting.
Lay the Keurig on its back and open the lid.
Using a Phillips #2 screwdriver, remove the two 21.0 mm screws.
Be careful when removing the screws. There is a sharp puncture needle!
You may need to use tweezers to get the screws out.
1024
Step 2
- Using a T15 Torx screwdriver, remove the two 29.0 mm screws on each ends of the handle.
Using a T15 Torx screwdriver, remove the two 29.0 mm screws on each ends of the handle.
Step 3
- Lift and pull the black plastic cover away from the Keurig.
Lift and pull the black plastic cover away from the Keurig.
Step 4
- Push the handle back and upward to detach it from the Keurig.
Push the handle back and upward to detach it from the Keurig.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Thu Hoang
Member since: 10/17/2018
217 Reputation
2 Guides authored
Badges:
4
+1 more badge
Team
UW Tacoma, Team S1-G6, Rose Fall 2018
Member of UW Tacoma, Team S1-G6, Rose Fall 2018
UWT-ROSE-F18S1G6
4 Members
5 Guides authored