Difficulty
Moderate
Steps
3
Time Required
Suggest a time??
Sections
1
- Water Filter
- 3 steps
Flags
0
BackKeurig B60
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Water Filter
- Remove the Water Reservoir Cap and the Water Reservoir from the brewer by simply pulling up and out
Remove the Water Reservoir Cap and the Water Reservoir from the brewer by simply pulling up and out
1024
Step 2
- Remove the three 9.5 mm Phillips #1 screws that secure the small circular screen to the bottom of the water reservoir.
Remove the three 9.5 mm Phillips #1 screws that secure the small circular screen to the bottom of the water reservoir.
Step 3
- This circular screen has a rubber “O”-ring around the base. Use the plastic opening tool to pry off the rubber seal. Replace with undamaged seal.
This circular screen has a rubber “O”-ring around the base. Use the plastic opening tool to pry off the rubber seal. Replace with undamaged seal.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Jake Wynn
Member since: 04/11/2016
794 Reputation
5 Guides authored
Badges:
17
+14 more badges
Team
Cal Poly, Team 1-7, Maness Spring 2016
Member of Cal Poly, Team 1-7, Maness Spring 2016
CPSU-MANESS-S16S1G7
5 Members
5 Guides authored
