Difficulty

Moderate

Steps

9

Time Required

Suggest a time??

Sections

2

  • Handle
  • 3 steps
  • Puncture Needle
  • 6 steps

Flags

0

  • BackKeurig B60

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Handle
  • Lift the handle

Lift the handle

1024

Step 2

  • Locate and remove the two 9.5 mm Torx T15 screws on both sides of the handle.

Locate and remove the two 9.5 mm Torx T15 screws on both sides of the handle.

Step 3

  • Remove the broken handle and replace with the new one

Remove the broken handle and replace with the new one

Step 4

              Puncture Needle
  • Locate and remove the two 9.5 mm Phillips #1 screws.
  • Remove the plastic ring around the K-Cup Pack Holder

Locate and remove the two 9.5 mm Phillips #1 screws.

Remove the plastic ring around the K-Cup Pack Holder

Step 5

  • Remove the two 9.5 mm Phillips #1 screws on the underside of the lid.

Remove the two 9.5 mm Phillips #1 screws on the underside of the lid.

Step 6

  • Detach the lid from the Keurig.

Detach the lid from the Keurig.

Step 7

  • Locate and remove the two 9.5 mm Phillips #1 screws on the top of the puncture needle.

Locate and remove the two 9.5 mm Phillips #1 screws on the top of the puncture needle.

Step 8

  • Squeeze and pull on the hose to remove it from the Puncture Needle
  • Puncture needle should now be exposed

Squeeze and pull on the hose to remove it from the Puncture Needle

Puncture needle should now be exposed

Step 9

  • Remove the Puncture Needle Assembly from Keurig

Remove the Puncture Needle Assembly from Keurig

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.

Author

                                      with 3 other contributors 


                    Jake Wynn

Member since: 04/11/2016

794 Reputation

                                      5 Guides authored                  



                       Badges:
                       17







                                                        +14 more badges

Team

                       Cal Poly, Team 1-7, Maness Spring 2016                        

                                                  Member of Cal Poly, Team 1-7, Maness Spring 2016 



                    CPSU-MANESS-S16S1G7                     


                                            5 Members                     


                                            5 Guides authored

johnneypa - Jan 17, 2017

Reply

Keurig B60 Puncture Needle Replacement. I need the punture needlees,upper and lower for this model.

John Lawson - Jun 4, 2019

Reply

I will be completing this guide but where do you get the replacement puncture needles for this model??

John Lawson