Difficulty

Easy

Steps

6

Time Required

                          5 - 10 minutes

Sections

1

  • CD/DVD Drive
  • 6 steps

Flags

0

  • BackKenwood DNX571HD

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              CD/DVD Drive
  • Unscrew the four 3.5mm side screws with a Phillips #1 screwdriver.
  • There are two screws per side.

Unscrew the four 3.5mm side screws with a Phillips #1 screwdriver.

There are two screws per side.

1024

Step 2

  • Use a spudger to unhook the plastic clips on the sides and top of the front panel. There are two clips on each side and one clip on the top.
  • Place the spudger between the plastic tab and the metal case and gently lift the spudger away from the case.

Use a spudger to unhook the plastic clips on the sides and top of the front panel. There are two clips on each side and one clip on the top.

Place the spudger between the plastic tab and the metal case and gently lift the spudger away from the case.

Step 3

  • Pull the top of the front panel out and down to remove front panel.
  • Remove the front panel gently so as not to damage the ribbon cables behind it.

Pull the top of the front panel out and down to remove front panel.

Remove the front panel gently so as not to damage the ribbon cables behind it.

Step 4

  • Unscrew the three 5mm screws from the top of the device using a Phillips #1 screwdriver.
  • Lift up to remove the top casing.

Unscrew the three 5mm screws from the top of the device using a Phillips #1 screwdriver.

Lift up to remove the top casing.

Step 5

  • Lift the CD drive carefully to expose the attached cable underneath.

Lift the CD drive carefully to expose the attached cable underneath.

Step 6

  • Flip up the black clasp with a spudger to disconnect the large white ribbon cable connecting the CD drive to the board underneath.

Flip up the black clasp with a spudger to disconnect the large white ribbon cable connecting the CD drive to the board underneath.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Wendy Zaballos

Member since: 09/17/2018

952 Reputation

                                      6 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Washington State, Team S1-G1, Hope Fall 2018                        

                                                  Member of Washington State, Team S1-G1, Hope Fall 2018 



                    WSU-HOPE-F18S1G1                     


                                            4 Members                     


                                            6 Guides authored